Top-ring minimum end gap by bore for gasoline engines with forged or standard cast pistons: bore × the ring makers' factor for the application, rounded to the nearest thousandth.
These are minimums for the top ring. For the second and oil rings, hypereutectic pistons and diesels, use the piston ring gap calculator. The sheet in your ring box always wins over a chart.
| Bore | NA street | NA drag / circle track | Nitrous to 200 hp | Nitrous over 200 hp | Turbo / blower street | Turbo / blower race |
|---|---|---|---|---|---|---|
| 3.000" | .014" | .015" | .018" | .021" | .018" | .021" |
| 3.250" | .015" | .016" | .020" | .023" | .020" | .023" |
| 3.500" | .016" | .018" | .021" | .025" | .021" | .025" |
| 3.750" | .017" | .019" | .023" | .026" | .023" | .026" |
| 3.875" | .017" | .019" | .023" | .027" | .023" | .027" |
| 4.000" | .018" | .020" | .024" | .028" | .024" | .028" |
| 4.030" | .018" | .020" | .024" | .028" | .024" | .028" |
| 4.125" | .019" | .021" | .025" | .029" | .025" | .029" |
| 4.250" | .019" | .021" | .026" | .030" | .026" | .030" |
| 4.500" | .020" | .023" | .027" | .032" | .027" | .032" |
Factors (gap per inch of bore): NA street 0.0045, NA drag / circle track 0.005, Nitrous to 200 hp 0.006, Nitrous over 200 hp 0.007, Turbo / blower street 0.006, Turbo / blower race 0.007.
The factor works the same way in metric: bore in mm × factor = gap in mm.
| Bore | NA street | NA drag / circle track | Nitrous to 200 hp | Nitrous over 200 hp | Turbo / blower street | Turbo / blower race |
|---|---|---|---|---|---|---|
| 75 mm | 0.34 mm | 0.38 mm | 0.45 mm | 0.53 mm | 0.45 mm | 0.53 mm |
| 80 mm | 0.36 mm | 0.40 mm | 0.48 mm | 0.56 mm | 0.48 mm | 0.56 mm |
| 82 mm | 0.37 mm | 0.41 mm | 0.49 mm | 0.57 mm | 0.49 mm | 0.57 mm |
| 84 mm | 0.38 mm | 0.42 mm | 0.50 mm | 0.59 mm | 0.50 mm | 0.59 mm |
| 86 mm | 0.39 mm | 0.43 mm | 0.52 mm | 0.60 mm | 0.52 mm | 0.60 mm |
| 87.5 mm | 0.39 mm | 0.44 mm | 0.53 mm | 0.61 mm | 0.53 mm | 0.61 mm |
| 90 mm | 0.41 mm | 0.45 mm | 0.54 mm | 0.63 mm | 0.54 mm | 0.63 mm |
| 92 mm | 0.41 mm | 0.46 mm | 0.55 mm | 0.64 mm | 0.55 mm | 0.64 mm |
| 95 mm | 0.43 mm | 0.48 mm | 0.57 mm | 0.67 mm | 0.57 mm | 0.67 mm |
| 100 mm | 0.45 mm | 0.50 mm | 0.60 mm | 0.70 mm | 0.60 mm | 0.70 mm |
Run the second ring 0.004"–0.008" (0.10–0.20 mm) wider than the top ring so pressure between the rings bleeds off instead of lifting the top ring.
Hypereutectic pistons with a high top ring need larger top gaps than this chart, and diesels have their own factory figures. The calculator covers both.