The minimum stall the cam makers list for their cams, grouped by intake duration at .050". Pooled from 460 cams in the Crane and Howards catalogs, mostly 300–455 ci V8s.
Engine size, vehicle weight, gearing and power adders move the number. The torque converter stall calculator takes all of them and gives the advertised rating to shop for.
| Intake duration @ .050" | Typical listed stall | Middle half of listings | Cams in band |
|---|---|---|---|
| 210–214° | 2,000 | 2,000–2,100 | 4 |
| 215–219° | 2,200 | 1,800–2,500 | 19 |
| 220–224° | 2,500 | 2,500 | 34 |
| 225–229° | 2,500 | 2,500–3,000 | 51 |
| 230–234° | 3,000 | 2,800–3,200 | 56 |
| 235–239° | 3,000 | 2,500–3,200 | 104 |
| 240–244° | 3,500 | 3,200–3,500 | 54 |
| 245–249° | 3,500 | 3,500–3,800 | 49 |
| 250–254° | 3,800 | 3,200–4,000 | 54 |
| 255–264° | 4,000 | 4,000–4,400 | 35 |
| 265–269° | 4,500 | 4,500–4,800 | 8 |
"Typical" is the median of the makers' listed minimum stall in each band; the middle half shows how much the listings spread.
Below about 214° the makers list no stall, so a stock converter is fine. They call 218–224° the biggest cam that still works with a stock converter, and even those run better with a 2,000+ stall.
A bigger engine or a heavier car flashes a given converter higher, so it can live at the low end of a band. A small engine in a light car wants the high end. Keep a street converter without lockup under your 65–70 mph cruise rpm.