LS Cylinder Heads by Casting

What heads are on a 5.3, an LQ4 or an LS3: every factory LS head by casting number, with the engines it came on, chamber volume, valve sizes, intake port volume and stock intake flow where two flow tests agree. A dash means the published figures disagree or haven't been confirmed by a second reference yet.

Swapping heads changes compression: put the new chamber cc into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.

LS factory heads

CastingYearsEnginesMaterialPortChamberValves (int / exh)Intake portStock flow (peak, 28")
806 *1997-1998LS1aluminumcathedral————
853, 241 *1999-2004LS1aluminumcathedral—2.000" / 1.550"—244 cfm
706, 8621999-2007—aluminumcathedral61 cc1.890" / 1.550"200 cc—
243, 7992001-2014LS6, LS2, LS4, L33, LY2, L20, LY5, LMG, LMF, LC9, LH6, LH8, LH9aluminumcathedral65 cc2.000" / 1.550"210 cc250 cfm
873, 373 *1999-2000LQ4cast iron—————
317, 0352001-2007LQ4, LQ9aluminumcathedral71 cc—210 cc244 cfm
823, 821, 0821, 5364, 27162007-2017L92, L76, LY6, L94, L9H, L96, L99, LS3, L77aluminumrectangle68 cc2.165" / 1.590"—318 cfm
12578452 *2006-2015LS7aluminumLS7 rectangle (raised, CNC-ported)70 cc2.200" / 1.610"——
1771 *2009-2013LS9aluminumrectangle (L92/LS3-based, with intake-port 'swirl wing')—2.165" / 1.590"——
4863 *2009-2015LSA—rectangle—2.165" / 1.590"——

* casting list confirmed by one reference so far. Flow is the stock intake port at 28 in. of water, the highest figure in the tests.

Calculators