See other engines in this family
American Motors 360ci specs: 360 ci (5.9L) 8-cylinder, 4.08 x 3.44 in (103.6 x 87.4 mm) bore and stroke, 8.67:1 compression. Rated 220 hp, 1974.
The American Motors 360ci is oversquare — the 4.08" bore exceeds the 3.44" stroke by 18.6% — a layout that favors airflow and RPM over leverage at the crank. The 3.44" stroke puts mean piston speed at 4,000 ft/min around 7,000 RPM, which is where a production bottom end is generally considered at its limit. A rod ratio of 1.708 is in the range most production engines fall in. Each of the 8 cylinders displaces 45.0 ci (737 cc).
8.67:1 is low by modern standards and generally happy on regular pump fuel.
It is one of 5 engines in the American Motors 360ci family, all of them 360 ci — the differences between them are in compression, heads and rating, not displacement.
| Displacement | 360 ci / 5.9 L |
|---|---|
| Bore | 4.08" |
| Stroke | 3.44" |
| Cylinders | 8 |
| Compression ratio | 8.67:1 |
| Rod length | 5.875" |
| Rod ratio | 1.708 |
| Bore/stroke ratio | 1.186 |
| Induction | 1-4 |
|---|---|
| Advertised HP | 220 hp |
| Years | 1974 |
| Bore/stroke character | 1.186 — oversquare — bore exceeds stroke, which favours higher RPM and larger valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,440 ft/min — conservative for a street engine |
| Rod ratio | 1.708 — moderate — the range most production V8s fall in |
| Displacement per cylinder | 45.0 ci |
| Static compression | 8.67:1 — low by modern standards, generally happy on regular pump fuel |
| Chamber volume | 58.6 cc |
|---|---|
| Rocker ratio | 1.6:1 |
| Lifter type | hydraulic |
Each link opens the calculator with this engine's specs already filled in.