Chevrolet 134ci 3.386" bore Specs: 3.386 x 3.724 in

See other engines in this family

Chevrolet 134ci 3.386" bore specs: 134 ci (2.2L) 4-cylinder, 3.386 x 3.724 in (86 x 94.6 mm) bore and stroke. Built 2007–2008.

With a 3.724" stroke over a 3.386" bore, the Chevrolet 134ci 3.386" bore is undersquare by 9.1%, so expect the 134 to pull low rather than rev. Piston speed on the 134 (3.724" stroke) gets to 4,000 ft/min near 6,450 rpm, the usual ceiling for stock rods and pistons. A 1.549 rod ratio is short, so the 134's rods run at a steep angle with more side load and harder piston acceleration, as in most strokers. Each of the 134's 4 cylinders displaces 33.5 ci (549 cc).

The Chevrolet 134ci family has 5 engines, all 134 ci, so what sets the 134 apart is its compression, heads and power rating. The factory built 3 versions on these dimensions, from 2007 to 2008.

Dimensions

Displacement134 ci / 2.2 L
Bore3.386"
Stroke3.724"
Cylinders4
NHRA blueprint max. compression10:1
Rod length5.768"
Rod ratio1.549
Bore/stroke ratio0.909
Piston deck clearance0.018" below deck

Construction

InductionSFI
NHRA filed HP148 hp
Years2007–2008

What these numbers mean

Bore/stroke character0.909, undersquare, favors low-end torque
Mean piston speed at 6,000 RPM3,724 ft/min (typical performance street range)
Rod ratio1.549 (short, more side load (common in strokers))
Displacement per cylinder33.5 ci

Cylinder head

Intake valve diameter1.382"
Exhaust valve diameter1.185"
Chamber volume50.7 cc
Rocker ratio1.69:1

Run the numbers for this engine

These open with the 134's bore, stroke and compression already entered.

Variants sharing these dimensions (3)

All 3 versions of the 134 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
2007144 hp—
2007148 hp—
2008148 hp—

Similar engines

← All Chevrolet 134ci engines