See other engines in this family
Chevrolet 237ci 3.898" bore specs: 237 ci (3.9L) 6-cylinder, 3.898 x 3.307 in (99 x 84 mm) bore and stroke. Built 2007–2008. Rod ratio and piston speed.
The Chevrolet 237ci 3.898" bore is oversquare: its 3.898" bore is 17.9% bigger than its 3.307" stroke. The big bore leaves room for big valves, so the 237 leans toward airflow and rpm. The 237's 3.307" stroke doesn't reach 4,000 ft/min of piston speed until about 7,250 rpm, so the valvetrain and breathing run out before the pistons do. The 237's 1.762 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 237's 6 cylinders displaces 39.5 ci (647 cc).
The Chevrolet 237ci family has 4 engines, all 237 ci, so what sets the 237 apart is its compression, heads and power rating. The factory built 3 versions on these dimensions, from 2007 to 2008.
| Displacement | 237 ci / 3.9 L |
|---|---|
| Bore | 3.898" |
| Stroke | 3.307" |
| Cylinders | 6 |
| NHRA blueprint max. compression | 9.6:1 |
| Rod length | 5.827" |
| Rod ratio | 1.762 |
| Bore/stroke ratio | 1.179 |
| Piston deck clearance | 0.035" below deck |
| Induction | SFI |
|---|---|
| NHRA filed HP | 240 hp |
| Years | 2007–2008 |
| Bore/stroke character | 1.179, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,307 ft/min (easy for a street engine) |
| Rod ratio | 1.762 (long, less side load on the bores) |
| Displacement per cylinder | 39.5 ci |
| Intake valve diameter | 1.876" |
|---|---|
| Exhaust valve diameter | 1.53" |
| Rocker ratio | 1.66:1 |
| Lifter type | hydraulic |
These open with the 237's bore, stroke and compression already entered.
All 3 versions of the 237 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 2007 | 233 hp | — |
| 2007 | 240 hp | — |
| 2008 | 233 hp | — |