Chrysler 225ci 3.406" bore Specs: 3.406 x 4.126 in

See other engines in this family

The same engine also has a main page: Chrysler 225ci 3.406" bore.

Chrysler 225ci 3.406" bore specs: 225 ci (3.7L) 6-cylinder, 3.406 x 4.126 in (86.5 x 104.8 mm) bore and stroke. Built 1961–1963.

The Chrysler 225ci 3.406" bore has more stroke than bore (4.126" against 3.406", 17.5% undersquare), a torque layout rather than a revving one. Spin the 225 to about 5,800 rpm and its 4.126" stroke is moving the pistons at 4,000 ft/min, roughly the safe limit for a stock bottom end. The 225's rod ratio of 1.624 is in the normal range for a production engine. Each of the 225's 6 cylinders displaces 37.5 ci (615 cc).

The Chrysler 225ci family has 9 engines, all 225 ci, so what sets the 225 apart is its compression, heads and power rating. The factory built 4 versions on these dimensions, from 1961 to 1963.

Dimensions

Displacement225 ci / 3.7 L
Bore3.406"
Stroke4.126"
Cylinders6
NHRA blueprint max. compression8.2:1
Rod length6.699"
Rod ratio1.624
Bore/stroke ratio0.825
Piston deck clearance0.157" below deck

Construction

Induction1-1
NHRA filed HP196 hp
Years1961–1963

What these numbers mean

Bore/stroke character0.825, undersquare, favors low-end torque
Mean piston speed at 6,000 RPM4,126 ft/min (typical performance street range)
Rod ratio1.624 (normal for a production engine)
Displacement per cylinder37.5 ci

Cylinder head

Intake valve diameter1.62"
Exhaust valve diameter1.36"
Chamber volume52.3 cc
Rocker ratio1.5:1
Lifter typemechanical

Run the numbers for this engine

These open with the 225's bore, stroke and compression already entered.

Variants sharing these dimensions (4)

All 4 versions of the 225 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
1961145 hp—
1961196 hp—
1962145 hp—
1963145 hp—

Similar engines

← All Chrysler 225ci engines