See other engines in this family
The same engine also has a main page: Chrysler 361ci 4.125" bore.
Chrysler 361ci 4.125" bore specs: 361 ci (5.9L) 8-cylinder, 4.125 x 3.38 in (104.8 x 85.9 mm) bore and stroke. Built 1960. Rod ratio and piston speed.
The Chrysler 361ci 4.125" bore has more bore than stroke (4.125" against 3.38", 22.0% oversquare), the layout that likes rpm and big valves. The 361's 3.38" stroke doesn't reach 4,000 ft/min of piston speed until about 7,100 rpm, so the valvetrain and breathing run out before the pistons do. The 361's 1.881 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 361's 8 cylinders displaces 45.1 ci (739 cc).
The Chrysler 361ci family has 3 engines, all 361 ci, so what sets the 361 apart is its compression, heads and power rating. The factory built 3 versions on these dimensions, in 1960.
| Displacement | 361 ci / 5.9 L |
|---|---|
| Bore | 4.125" |
| Stroke | 3.38" |
| Cylinders | 8 |
| NHRA blueprint max. compression | 10:1 |
| Rod length | 6.358" |
| Rod ratio | 1.881 |
| Bore/stroke ratio | 1.22 |
| Deck height | 9.98" |
| Piston deck clearance | 0.023" below deck |
| Induction | 1-2 |
|---|---|
| NHRA filed HP | 310 hp |
| Years | 1960 |
| Bore/stroke character | 1.220, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,380 ft/min (easy for a street engine) |
| Rod ratio | 1.881 (long, less side load on the bores) |
| Displacement per cylinder | 45.1 ci |
| Intake valve diameter | 1.95" |
|---|---|
| Exhaust valve diameter | 1.6" |
| Chamber volume | 70.9 cc |
| Rocker ratio | 1.5:1 |
| Lifter type | hydraulic |
These open with the 361's bore, stroke and compression already entered.
All 3 versions of the 361 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 1960 | 295 hp | — |
| 1960 | 305 hp | — |
| 1960 | 310 hp | — |