See other engines in this family
Ford 1983 232 110HP specs: 232 ci (3.8L) 6-cylinder, 3.811 x 3.386 in (96.8 x 86 mm) bore and stroke, 9.1:1 compression. Rated 110 hp, 1983.
The Ford 1983 232 110HP is oversquare — the 3.811" bore exceeds the 3.386" stroke by 12.6% — a layout that favors airflow and RPM over leverage at the crank. The 3.386" stroke does not reach 4,000 ft/min of mean piston speed until about 7,100 RPM, so piston speed is not what limits this engine's revs — valvetrain and breathing are. A rod ratio of 1.745 is in the range most production engines fall in. Each of the 6 cylinders displaces 38.7 ci (634 cc).
9.1:1 on iron heads is low by modern standards and generally happy on regular pump fuel.
It is one of 11 engines in the Ford 232ci family, all of them 232 ci — the differences between them are in compression, heads and rating, not displacement.
| Displacement | 232 ci / 3.8 L |
|---|---|
| Bore | 3.811" |
| Stroke | 3.386" |
| Cylinders | 6 |
| Configuration | I6 |
| Compression ratio | 9.1:1 |
| Rod length | 5.91" |
| Rod ratio | 1.745 |
| Bore/stroke ratio | 1.126 |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Advertised HP | 110 hp |
| Years | 1983 |
| Bore/stroke character | 1.126 — oversquare — bore exceeds stroke, which favours higher RPM and larger valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,386 ft/min — conservative for a street engine |
| Rod ratio | 1.745 — moderate — the range most production V8s fall in |
| Displacement per cylinder | 38.7 ci |
| Static compression | 9.1:1 — low by modern standards, generally happy on regular pump fuel |
| Intake valve diameter | 1.795" |
|---|---|
| Exhaust valve diameter | 1.47" |
Each link opens the calculator with this engine's specs already filled in.