Pontiac 325ci 3.78" bore Specs: 3.78 x 3.622 in

See other engines in this family

Pontiac 325ci 3.78" bore specs: 325 ci (5.3L) 8-cylinder, 3.78 x 3.622 in (96 x 92 mm) bore and stroke. Built 2007–2008. Rod ratio and piston speed.

The Pontiac 325ci 3.78" bore is close to square: 3.78" bore against 3.622" stroke, within 4.4%, so the 325 sits between a revving layout and a torque layout. Piston speed on the 325 (3.622" stroke) gets to 4,000 ft/min near 6,650 rpm, the usual ceiling for stock rods and pistons. The 325's rod ratio of 1.684 is in the normal range for a production engine. Each of the 325's 8 cylinders displaces 40.6 ci (666 cc).

The Pontiac 325ci family has 2 engines, all 325 ci, so what sets the 325 apart is its compression, heads and power rating. The factory built 2 versions on these dimensions, from 2007 to 2008.

Dimensions

Displacement325 ci / 5.3 L
Bore3.78"
Stroke3.622"
Cylinders8
NHRA blueprint max. compression10:1
Rod length6.098"
Rod ratio1.684
Bore/stroke ratio1.044
Piston deck clearance0.008" above deck

Construction

InductionSFI
NHRA filed HP303 hp
Years2007–2008

What these numbers mean

Bore/stroke character1.044, square (within 5%)
Mean piston speed at 6,000 RPM3,622 ft/min (typical performance street range)
Rod ratio1.684 (normal for a production engine)
Displacement per cylinder40.6 ci

Cylinder head

Intake valve diameter2"
Exhaust valve diameter1.55"
Chamber volume63.4 cc
Rocker ratio1.7:1
Lifter typehydraulic

Run the numbers for this engine

These open with the 325's bore, stroke and compression already entered.

Variants sharing these dimensions (2)

All 2 versions of the 325 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
2007303 hp—
2008303 hp—

Similar engines

← All Pontiac 325ci engines