See other engines in this family
Saturn 134ci 3.386" bore specs: 134 ci (2.2L) 4-cylinder, 3.386 x 3.724 in (86 x 94.6 mm) bore and stroke. Built 2007. Rod ratio and piston speed.
With a 3.724" stroke over a 3.386" bore, the Saturn 134ci 3.386" bore is undersquare by 9.1%, so expect the 134 to pull low rather than rev. Piston speed on the 134 (3.724" stroke) gets to 4,000 ft/min near 6,450 rpm, the usual ceiling for stock rods and pistons. The 134's 1.549 rod ratio is short, with more rod angle and side load than most, so piston speed deserves a close look on a build. Each of the 134's 4 cylinders displaces 33.5 ci (549 cc).
| Displacement | 134 ci / 2.2 L |
|---|---|
| Bore | 3.386" |
| Stroke | 3.724" |
| Cylinders | 4 |
| NHRA blueprint max. compression | 10:1 |
| Rod length | 5.768" |
| Rod ratio | 1.549 |
| Bore/stroke ratio | 0.909 |
| Piston deck clearance | 0.018" below deck |
| Induction | SFI |
|---|---|
| NHRA filed HP | 145 hp |
| Years | 2007 |
| Bore/stroke character | 0.909, undersquare, favors low-end torque |
|---|---|
| Mean piston speed at 6,000 RPM | 3,724 ft/min (typical performance street range) |
| Rod ratio | 1.549 (short, more side load (common in strokers)) |
| Displacement per cylinder | 33.5 ci |
| Intake valve diameter | 1.382" |
|---|---|
| Exhaust valve diameter | 1.185" |
| Chamber volume | 50.7 cc |
Each calculator below starts with the 134's numbers filled in.