The 2JZ-GE and 2JZ-GTE share one iron block, 86 mm bore and 86 mm stroke; the cams, heads and VVT-i vary by year and market. The 2JZ figures below come from the crank and piston makers' catalogs and factory specs, shown only where two references agree.
For a 2JZ bore and stroke not listed, use the displacement calculator; for rod angle and side load, the rod ratio calculator.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Combination | Bore × stroke | Displacement | Rod | Compression height | Rod ratio |
|---|---|---|---|---|---|
| 3.0L stock | 86 × 86 mm | 2997 cc (182.9 ci) | 142 mm | 34 mm | 1.65 |
| 3.0L +0.5 mm | 86.5 × 86 mm | 3032 cc (185.0 ci) | 142 mm | 34 mm | 1.65 |
| 3.1L | 87 × 86 mm | 3068 cc (187.2 ci) | 142 mm | 34 mm | 1.65 |
| 3.4L HKS / Tomei / Brian Crower | 87 × 94 mm | 3353 cc (204.6 ci) | 142 mm | 30 mm | 1.51 |
Compression height = deck height − half the stroke − rod length.
| Stroke | Rod lengths sold with it |
|---|---|
| 86 mm (3.386") | 142 mm |
| 94 mm (3.701") | 142 mm |
| Stroke | 139 mm rod | 142 mm rod |
|---|---|---|
| 84.5 mm | 37.75 mm | 34.75 mm |
| 86 mm | 37 mm | 34 mm |
| 90 mm | 35 mm | 32 mm |
| 94 mm | 33 mm | 30 mm |
| 96 mm | 32 mm | 29 mm |
| 100 mm | 30 mm | 27 mm * |
* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.
| Block | Stock bore | Deck height | Stock stroke | Stock rod |
|---|---|---|---|---|
| Toyota 2JZ iron block (2JZ-GE, 2JZ-GTE, 2JZ-FSE) | 86 mm (3.386") | 219 mm (8.622") | 86 mm (3.386") | 142 mm (5.591") |