Big-Block Chevy Stroker Combinations

The Mark IV big block (396, 402, 427, 454) and the later Gen V and Gen VI 454 and 502 share a 4.84-inch bore spacing; oval and rectangle port heads split the family. The big-block Chevy figures below come from the crank and piston makers' catalogs and factory specs, shown only where two references agree.

For a big-block Chevy bore and stroke not listed, use the displacement calculator; for rod angle and side load, the rod ratio calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Common big-block Chevy stroker combinations

CombinationBore × strokeCubic inchesRodCompression heightRod ratio
3964.094" × 3.766"396.66.135"1.782"1.63
4024.125" × 3.766"402.66.135"1.782"1.63
4274.250" × 3.766"427.46.135"1.782"1.63
GM Gen V/VI 4274.250" × 3.750"425.66.135"1.790"1.64
4544.250" × 4.000"454.06.135"1.665"1.53
454 +.0304.280" × 4.000"460.46.135"1.665"1.53
454 block, 4.250 crank +.0304.280" × 4.250"489.26.385"1.290"1.50
454 block, 4.250 crank, 6.135 rod4.280" × 4.250"489.26.135"1.540"1.44
454 block, 4.375 crank +.0304.280" × 4.375"503.66.385"1.228"1.46
5404.500" × 4.250"540.76.385"1.290"1.50
GM ZZ5724.560" × 4.375"571.66.535"1.477"1.49
6324.600" × 4.750"631.56.700"1.125"1.41

Compression height = deck height − half the stroke − rod length.

Crank strokes sold for the big-block Chevy

StrokeRod lengths sold with it
3.750"6.135
3.766"6.135, 6.385
4.000"6.135, 6.385, 6.535
4.250"6.135, 6.385, 6.535
4.375"6.385, 6.535
4.500"6.535, 6.660, 6.700, 6.800
4.625"6.535, 6.660
4.750"6.660, 6.700

Compression height by stroke and rod length (9.800" deck)

Stroke6.135" rod6.385" rod6.535" rod6.700" rod6.800" rod
3.750"1.790"1.540"1.390"1.225"1.125"
3.766"1.782"1.532"1.382"1.217"1.117"
4.000"1.665"1.415"1.265"1.100"1.000"
4.250"1.540"1.290"1.140"0.975" *0.875" *
4.375"1.478"1.228"1.078"0.913" *0.813" *
4.500"1.415"1.165"1.015"0.850" *0.750" *
4.625"1.353"1.103"0.953" *0.788" *0.688" *
4.750"1.290"1.040"0.890" *0.725" *0.625" *

* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.

Compression height by stroke and rod length (10.200" deck)

Stroke6.135" rod6.385" rod6.535" rod6.700" rod6.800" rod
3.750"2.190"1.940"1.790"1.625"1.525"
3.766"2.182"1.932"1.782"1.617"1.517"
4.000"2.065"1.815"1.665"1.500"1.400"
4.250"1.940"1.690"1.540"1.375"1.275"
4.375"1.877"1.627"1.477"1.312"1.212"
4.500"1.815"1.565"1.415"1.250"1.150"
4.625"1.752"1.502"1.352"1.187"1.087"
4.750"1.690"1.440"1.290"1.125"1.025"

* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.

big-block Chevy blocks: bore and deck height

BlockStock boreDeck heightStock strokeStock rod
396 Mark IV (1965-69, incl. L35/L34/L78/L37/L89/L66) and 1970-72 '402' (sold as 'Turbo-Jet 400' / 'SS 396')4.094"9.800"3.766"6.135"
427 Mark IV passenger (1966-69, L36/L72/L68/L71/L88/L89/LS1/ZL1)4.250"9.800"3.766"6.135"
454 Mark IV (1970-90, two-piece rear seal, incl. LS5/LS6/LS4/LF8/LE8 trucks)4.250"9.800"4.000"6.135"
454 Gen V (1991-95, L19) and Gen VI (1996-2000, L29 Vortec 7400), one-piece rear seal4.250"9.800"4.000"6.135"
502 Gen V/VI (GM 502 HO, Ram Jet 502, marine 8.2; GM crate 502s now use block 19170540)4.470"9.800"4.000"6.135"
366 tall-deck truck (medium-duty, 1960s-2004)3.935"10.200"3.760"6.135"
427 tall-deck truck (medium-duty)4.250"10.200"3.760"6.135"
GM 427/454 production-based replacement block 19170538 (current)4.250"9.800"——
GM 502 production-based replacement block 19170540 (current)4.470"9.800"——
GM Bowtie Sportsman / Bowtie Race blocks (19212191/192 9.800; 19212194/195 10.200; 19212196/197 steel-cap race)4.494"9.800"——
GM ZL1 aluminum block 12370850 (current)4.240"9.800"——

Calculators