The 370, 429 and 460 share the 385-series block and its 4.90-inch bore spacing; the 429 Cobra Jet and the Boss 429 carry their own heads. The 385-series figures below come from the crank and piston makers' catalogs and factory specs, shown only where two references agree.
For a 385-series bore and stroke not listed, use the displacement calculator; for rod angle and side load, the rod ratio calculator.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Combination | Bore × stroke | Cubic inches | Rod | Compression height | Rod ratio |
|---|---|---|---|---|---|
| 429 | 4.360" × 3.590" | 428.8 | 6.605" | 1.900" | 1.84 |
| 460 | 4.360" × 3.850" | 459.8 | 6.605" | 1.792" | 1.72 |
| Boss 429 'S' | 4.360" × 3.590" | 428.8 | 6.549" | 1.956" | 1.82 |
| 514 | 4.360" × 4.300" | 513.6 | 6.700" | 1.472" | 1.56 |
| 521 | 4.390" × 4.300" | 520.7 | 6.800" | 1.372" | 1.58 |
Compression height = deck height − half the stroke − rod length.
| Stroke | Rod lengths sold with it |
|---|---|
| 3.590" | 6.605 |
| 3.850" | 6.605 |
| 4.300" | 6.700, 6.800 |
| 4.500" | 6.700 |
| Stroke | 6.605" rod | 6.700" rod | 6.800" rod |
|---|---|---|---|
| 3.850" | 1.792" | — | — |
| 4.140" | — | 1.552" | 1.452" |
| 4.150" | — | 1.547" | — |
| 4.300" | — | 1.472" | 1.372" |
| 4.500" | — | 1.372" | — |
| 4.625" | — | 1.309" | — |
* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.
| Block | Stock bore | Deck height | Stock stroke | Stock rod |
|---|---|---|---|---|
| 429 (1968-73) | 4.360" | 10.300" | 3.590" | 6.605" |
| Boss 429 (1969-70) | 4.360" | 10.300" | 3.590" | — |
| 460 (1968-97) | 4.360" | 10.322" | 3.850" | 6.605" |