The 5.7, 6.1, 6.4 and supercharged 6.2 Hemis use one bore spacing with different bores and decks, and the 2009-up Eagle heads changed the ports. The Gen III Hemi figures below come from the crank and piston makers' catalogs and factory specs, shown only where two references agree.
For a Gen III Hemi bore and stroke not listed, use the displacement calculator; for rod angle and side load, the rod ratio calculator.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Combination | Bore × stroke | Cubic inches | Rod | Compression height | Rod ratio |
|---|---|---|---|---|---|
| 5.7 stock | 3.917" × 3.578" | 344.9 | 6.243" | 1.218" | 1.75 |
| 6.1 stock | 4.055" × 3.578" | 369.7 | 6.243" | 1.218" | 1.75 |
| 6.2 supercharged stock | 4.090" × 3.578" | 376.1 | 6.200" | 1.261" | 1.73 |
| 6.4 stock | 4.090" × 3.724" | 391.4 | 6.200" | 1.188" | 1.67 |
| 5.7 + 4.050 crank at 3.927 | 3.927" × 4.050" | 392.4 | 6.125" | 1.100" | 1.51 |
| 5.7 + 4.050 at .040 | 3.957" × 4.050" | 398.4 | 6.125" | 1.100" | 1.51 |
| 6.4/6.2 + 4.050 at 4.090 | 4.090" × 4.050" | 425.7 | 6.125" | 1.100" | 1.51 |
Compression height = deck height − half the stroke − rod length.
| Stroke | Rod lengths sold with it |
|---|---|
| 3.578" | 6.243, 6.200 |
| 3.724" | 6.200 |
| 3.795" | 6.125 |
| 3.900" | 6.125, 6.200 |
| 4.000" | 6.125, 6.200 |
| 4.050" | 6.125 |
| 4.080" | 6.125 |
| 4.250" | 6.125 |
| Stroke | 6.125" rod | 6.200" rod | 6.243" rod |
|---|---|---|---|
| 3.578" | 1.336" | 1.261" | 1.218" |
| 3.724" | 1.263" | 1.188" | 1.145" |
| 3.795" | 1.228" | 1.153" | 1.110" |
| 3.800" | 1.225" | 1.150" | 1.107" |
| 3.900" | 1.175" | 1.100" | 1.057" |
| 4.000" | 1.125" | 1.050" | 1.007" |
| 4.050" | 1.100" | 1.025" | 0.982" * |
| 4.080" | 1.085" | 1.010" | 0.967" * |
| 4.200" | 1.025" | 0.950" * | 0.907" * |
| 4.250" | 1.000" | 0.925" * | 0.882" * |
* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.
| Block | Stock bore | Deck height | Stock stroke | Stock rod |
|---|---|---|---|---|
| 5.7 Hemi (2003-2008 non-VVT and 2009-on VVT) | 3.917" | 9.250" | 3.578" | 6.243" |
| 6.1 Hemi (2005-2010) | 4.055" | 9.250" | 3.578" | 6.243" |
| 6.4 Hemi 392 Apache (2011-on) | 4.090" | — | 3.724" | 6.200" |
| 6.2 supercharged Hellcat/Demon (2015-on) | 4.090" | — | 3.578" | 6.200" |