B16, B17, B18 and B20 blocks come in two deck heights, which is why stroker and hybrid B builds start with the block choice. The B-series figures below come from the crank and piston makers' catalogs and factory specs, shown only where two references agree.
For a B-series bore and stroke not listed, use the displacement calculator; for rod angle and side load, the rod ratio calculator.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Combination | Bore × stroke | Displacement | Rod | Compression height | Rod ratio |
|---|---|---|---|---|---|
| LS/VTEC | 81 × 89 mm | 1835 cc (111.9 ci) | 137 mm | 30.5 mm | 1.54 |
| B20 VTEC | 84 × 89 mm | 1973 cc (120.4 ci) | 137 mm | 30.5 mm | 1.54 |
| B20 VTEC at 85.0 mm | 85 × 89 mm | 2020 cc (123.3 ci) | 137 mm | 30.5 mm | 1.54 |
Compression height = deck height − half the stroke − rod length.
| Stroke | Rod lengths sold with it |
|---|---|
| 77.4 mm (3.047") | 134.4 mm, 142.42 mm |
| 87.2 mm (3.433") | 138 mm |
| 89 mm (3.504") | 137 mm |
| Stroke | 137 mm rod | 138 mm rod | 140 mm rod | 142.42 mm rod |
|---|---|---|---|---|
| 77.4 mm | 36.3 mm | 35.3 mm | 33.3 mm | 30.88 mm |
| 87.2 mm | 31.4 mm | 30.4 mm | 28.4 mm | 25.98 mm * |
| 89 mm | 30.5 mm | 29.5 mm | 27.5 mm | 25.08 mm * |
| 92 mm | 29 mm | 28 mm | 26 mm | 23.58 mm * |
| 95 mm | 27.5 mm | 26.5 mm | 24.5 mm * | 22.08 mm * |
* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.
| Block | Stock bore | Deck height | Stock stroke | Stock rod |
|---|---|---|---|---|
| B16A (low deck, 1989-2000) | 81 mm (3.189") | — | 77.4 mm (3.047") | 134.4 mm (5.291") |
| B17A1 (low deck, 1992-93 GS-R) | 81 mm (3.189") | — | — | — |
| B18A1 / B18B1 (tall deck, non-VTEC) | 81 mm (3.189") | 212 mm (8.346") | 89 mm (3.504") | 137 mm (5.394") |
| B18C (tall deck, GS-R and Type R) | 81 mm (3.189") | 212 mm (8.346") | 87.2 mm (3.433") | 138 mm (5.433") |
| B16B (tall deck, Civic Type R) | 81 mm (3.189") | — | — | — |
| B20B / B20Z (tall deck, CR-V) | 84 mm (3.307") | 212 mm (8.346") | 89 mm (3.504") | 137 mm (5.394") |