Honda K-Series Stroker Combinations

The K20 and K24 share a head design but not a deck height: the K24's taller block carries a longer stroke. The K-series figures below come from the crank and piston makers' catalogs and factory specs, shown only where two references agree.

For a K-series bore and stroke not listed, use the displacement calculator; for rod angle and side load, the rod ratio calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Common K-series stroker combinations

CombinationBore × strokeDisplacementRodCompression heightRod ratio
K20 stock86 × 86 mm1998 cc (121.9 ci)139 mm30 mm1.62
K24 stock87 × 99 mm2354 cc (143.7 ci)152 mm30 mm1.53
K24 block + K20 head87 × 99 mm2354 cc (143.7 ci)152 mm30 mm1.53

Compression height = deck height − half the stroke − rod length.

Crank strokes sold for the K-series

StrokeRod lengths sold with itBlock
86 mm (3.386")139 mmK20
99 mm (3.898")152 mmK24, K20 (K24 crank in K20 block)

Compression height by stroke and rod length (212 mm deck)

Stroke130 mm rod132.5 mm rod139 mm rod140 mm rod
86 mm39 mm36.5 mm30 mm29 mm
92 mm36 mm33.5 mm27 mm26 mm *
99 mm32.5 mm30 mm23.5 mm *22.5 mm *

* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.

Compression height by stroke and rod length (231.5 mm deck)

Stroke148 mm rod149 mm rod152 mm rod153.67 mm rod
92 mm37.5 mm36.5 mm33.5 mm31.83 mm
99 mm34 mm33 mm30 mm28.33 mm
102 mm32.5 mm31.5 mm28.5 mm26.83 mm *
106 mm30.5 mm29.5 mm26.5 mm *24.83 mm *

* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.

K-series blocks: bore and deck height

BlockStock boreDeck heightStock strokeStock rod
K20 short deck (K20A, K20A2, K20A3, K20Z1, K20Z3; aluminum, cast iron sleeves)86 mm (3.386")212 mm (8.346")86 mm (3.386")139 mm (5.472")
K24 tall deck (K24A1/A2/A3/A4/A8, K24Z1-Z7; K23A1 uses this deck height)87 mm (3.425")231.5 mm (9.114")99 mm (3.898")152 mm (5.984")
K20C1 turbo block (2015-on Civic Type R)86 mm (3.386")——143.66 mm (5.656")

Calculators