Nissan SR20 and RB Stroker Combinations

The aluminum SR20 four and the iron-block RB20, RB25, RB26 and RB30 sixes cover most Nissan swap and turbo builds. The SR20 and RB figures below come from the crank and piston makers' catalogs and factory specs, shown only where two references agree.

For a SR20 and RB bore and stroke not listed, use the displacement calculator; for rod angle and side load, the rod ratio calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Common SR20 and RB stroker combinations

CombinationBore × strokeDisplacementRodCompression heightRod ratio
SR20 stock86 × 86 mm1998 cc (121.9 ci)136.25 mm32 mm1.58
JUN / Toda / Mazworx SR20 2.287 × 92 mm2188 cc (133.5 ci)———
RB25 stock86 × 71.7 mm2499 cc (152.5 ci)121.5 mm31.15 mm1.70
RB26 stock86 × 73.7 mm2569 cc (156.7 ci)121.5 mm30.15 mm1.65
Tomei RB2887 × 77.7 mm2771 cc (169.1 ci)119.5 mm30.15 mm1.54
RB30 stock86 × 85 mm2963 cc (180.8 ci)152.4 mm35.6 mm1.79
Nitto RB30 '3.2L'87 × 90 mm3210 cc (195.9 ci)152.4 mm33.1 mm1.69

Compression height = deck height − half the stroke − rod length.

Crank strokes sold for the SR20 and RB

StrokeRod lengths sold with itBlock
86 mm (3.386")136.25 mmSR20
91 mm (3.583")136.25 mmSR20
92 mm (3.622")—SR20
71.7 mm (2.823")121.5 mmRB25
73.7 mm (2.902")121.5 mmRB26
77.7 mm (3.059")119.5 mm, 121.5 mmRB25/RB26
85 mm (3.346")152.4 mmRB30
90 mm (3.543")152.4 mmRB30

Compression height by stroke and rod length (188.5 mm deck)

Stroke119.5 mm rod121.5 mm rod127.5 mm rod
71.7 mm33.15 mm31.15 mm25.15 mm
73.7 mm32.15 mm30.15 mm24.15 mm *
77.7 mm30.15 mm28.15 mm22.15 mm *
84 mm27 mm25 mm19 mm *

* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.

Compression height by stroke and rod length (211.25 mm deck)

Stroke134 mm rod136.25 mm rod
86 mm34.25 mm32 mm
91 mm31.75 mm29.5 mm
92 mm31.25 mm29 mm

* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.

SR20 and RB blocks: bore and deck height

BlockStock boreDeck heightStock strokeStock rod
SR20DE / SR20DET (all SR20)86 mm (3.386")211.25 mm (8.317")86 mm (3.386")136.25 mm (5.364")
RB20 (RB20E/ET/DE/DET)78 mm (3.071")———
RB25DE / RB25DET (incl. NEO)86 mm (3.386")188.5 mm (7.421")71.7 mm (2.823")121.5 mm (4.783")
RB26DETT (05U and N1 24U)86 mm (3.386")188.5 mm (7.421")73.7 mm (2.902")121.5 mm (4.783")
RB30 (RB30E/ET; RB30 'DET' hybrids with RB25/RB26 heads)86 mm (3.386")—85 mm (3.346")152.4 mm (6.000")

Calculators