The 221, 260, 289, 302/5.0 and 351 Windsor share a bore spacing but split into two deck heights, which decides which crank and rod combinations fit. The small-block Ford figures below come from the crank and piston makers' catalogs and factory specs, shown only where two references agree.
For a small-block Ford bore and stroke not listed, use the displacement calculator; for rod angle and side load, the rod ratio calculator.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Combination | Bore × stroke | Cubic inches | Rod | Compression height | Rod ratio |
|---|---|---|---|---|---|
| 289 | 4.000" × 2.870" | 288.5 | 5.155" | 1.616" | 1.80 |
| 302 | 4.000" × 3.000" | 301.6 | 5.090" | 1.616" | 1.70 |
| 302 with 5.400 rod | 4.000" × 3.000" | 301.6 | 5.400" | 1.306" | 1.80 |
| 331 | 4.030" × 3.250" | 331.6 | 5.400" | 1.181" | 1.66 |
| 347 | 4.030" × 3.400" | 347.0 | 5.400" | 1.106" | 1.59 |
| 351W | 4.000" × 3.500" | 351.9 | 5.956" | 1.794" | 1.70 |
| 383W | 4.030" × 3.750" | 382.7 | 6.250" | 1.375" | 1.67 |
| 393W | 4.030" × 3.850" | 392.9 | 6.200" | 1.375" | 1.61 |
| 393W with stock-length rod | 4.030" × 3.850" | 392.9 | 5.956" | 1.619" | 1.55 |
| 408W | 4.030" × 4.000" | 408.2 | 6.200" | 1.300" | 1.55 |
| 408W with 6.250 rod | 4.030" × 4.000" | 408.2 | 6.250" | 1.250" | 1.56 |
Compression height = deck height − half the stroke − rod length.
| Stroke | Rod lengths sold with it |
|---|---|
| 2.870" | 5.155, 5.090, 5.400 |
| 3.000" | 5.090, 5.400 |
| 3.250" | 5.400 |
| 3.400" | 5.400 |
| 3.500" | 5.956, 6.000, 6.200, 6.300 |
| 3.750" | 6.000, 6.200, 6.250 |
| 3.850" | 5.956, 6.200 |
| 4.000" | 6.000, 6.200, 6.250 |
| Stroke | 5.090" rod | 5.155" rod | 5.400" rod |
|---|---|---|---|
| 2.870" | 1.681" | 1.616" | 1.371" |
| 3.000" | 1.616" | 1.551" | 1.306" |
| 3.250" | 1.491" | 1.426" | 1.181" |
| 3.400" | 1.416" | 1.351" | 1.106" |
* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.
| Stroke | 5.956" rod | 6.000" rod | 6.200" rod | 6.250" rod | 6.300" rod |
|---|---|---|---|---|---|
| 3.500" | 1.794" | 1.750" | 1.550" | 1.500" | 1.450" |
| 3.750" | 1.669" | 1.625" | 1.425" | 1.375" | 1.325" |
| 3.850" | 1.619" | 1.575" | 1.375" | 1.325" | 1.275" |
| 4.000" | 1.544" | 1.500" | 1.300" | 1.250" | 1.200" |
| 4.100" | 1.494" | 1.450" | 1.250" | 1.200" | 1.150" |
| 4.170" | 1.459" | 1.415" | 1.215" | 1.165" | 1.115" |
* very short piston: the pin bore runs into the oil ring groove, so few pistons are made this short.
| Block | Stock bore | Deck height | Stock stroke | Stock rod |
|---|---|---|---|---|
| 221 (1962-63) | 3.500" | 8.206" | 2.870" | 5.155" |
| 260 (1962-64) | 3.800" | 8.206" | 2.870" | 5.155" |
| 289 (1963-68) | 4.000" | 8.206" | 2.870" | 5.155" |
| 302 / 5.0 (1968-2001) | 4.000" | 8.206" | 3.000" | 5.090" |
| 351 Windsor, 1969-70 block | 4.000" | 9.480" | 3.500" | 5.956" |
| 351 Windsor, 1971-97 block | 4.000" | 9.500" | 3.500" | 5.956" |