The Mark IV big block (396, 402, 427, 454) and the later Gen V and Gen VI 454 and 502 share a 4.84-inch bore spacing; oval and rectangle port heads split the family. This chart lists the factory big-block Chevy camshafts with the figures confirmed by the factory or by two references that agree; a dash marks a big-block Chevy figure still unconfirmed or disputed.
Advertised duration on big-block Chevy cams is measured at each maker's own checking height, which changed over the years, so a big-block Chevy advertised figure is best compared with others from the same maker.
Compare a replacement cam with stock in the cam overlap and duration calculator, or let the cam selector size one for your combination.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Cam | Engines | Years | Advertised duration (int / exh) | Duration @ .050" (int / exh) | Valve lift (int / exh) | LSA | Part number |
|---|---|---|---|---|---|---|---|
| Mark IV base hydraulic | L35 396/325, L66 396/265 2-bbl, LS1 427/335, LS3 402/330 | 1965-1970 | 322° / 322° | 196° / 196° | 0.398 / 0.398 | 113.5° | 3874872 (GM part number; 1969 casting 3874874), 3904365 (1967-68 396/325 part number; single) |
| Mark IV low-output hydraulic | 454 base, LS3 402, LS4 454, 454 passenger and truck 1976-93 | 1970, 1971-72, 1976 | — | 192-193° / 203° | 0.398 / 0.430 | 110.5-112° | 3963544 (GM part number, casting 3963545, ID 'M' in a circle), 12364056 (GM Performance Parts 'truck cam, with carb or TBI', made by Crane; same lift; a replacement listing, not shown to be the production part) |
| Mark IV high-performance hydraulic | L34 396/360, 396/350, 402/350, L36 427/390 and 385, L68 427/400 Tri-Power, LS5 454/360-390, 365, 270 net | 1966-1972 | 350° / 352° | 214° / 218° | 0.461 / 0.480 | 115° | 3883986 (GM part number from 1969; casting 3883944), 3904359 (1967-68 and 1970-72 part number; casting 3904364) |
| 1965 Z16 Chevelle L37 hydraulic | L37 396/375 | 1965 | 342° / 356° | — | 0.461 / 0.500 | 113.5° | — |
| 1965-66 Mark IV solid-lifter cam | L78 396/425, L78 396/375, L72 427/425 | 1965-1966 | 336° / 336° | — | 0.520 / 0.520 | 114° | — |
| 1967-71 Mark IV solid-lifter cam | L71 427/435, L72 427/425, L78 396/375, 402/375, LS6 454/450 and 454/425 | 1967-1969 | 316° / 302° | 242° / 242° | 0.520 / 0.520 | 114° | 3904362 (GM part number 1967-68; casting 3904366, ID 'OMO'), 3863143 (GM part number; also the service number in Baechtel, Fisher and Currao) |
| L88 solid-lifter race cam | L88 427/430 | 1968-1969 | — | 264° / 269° | 0.560 / 0.580 | 112° | 3925535 (GM L88 cam, chain drive; 3925533 gear drive), 3928911 |
| 1973-75 454 hydraulic | LS4 454, 454 medium-duty 4-bbl 1979-80 | 1973-1975 | 346° / 348° | — | 0.440 / 0.440 | 113.5-114.5° | 353040 (GM part number, casting 353041, ID 'Square') |
| Gen VI 7.4 hydraulic roller | L29, L21 | 1996-2000 | — | 204° / 209° | 0.480 / 0.483 | 118° | — |
Valve lift is at the valve with the stock rocker ratio.