Gen III Hemi Stock Cam Specs

The 5.7, 6.1, 6.4 and supercharged 6.2 Hemis use one bore spacing with different bores and decks, and the 2009-up Eagle heads changed the ports. This chart lists the factory Gen III Hemi camshafts with the figures confirmed by the factory or by two references that agree; a dash marks a Gen III Hemi figure still unconfirmed or disputed.

Advertised duration on Gen III Hemi cams is measured at each maker's own checking height, which changed over the years, so a Gen III Hemi advertised figure is best compared with others from the same maker.

Compare a replacement cam with stock in the cam overlap and duration calculator, or let the cam selector size one for your combination.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Gen III Hemi factory cam specs

CamEnginesYearsAdvertised duration (int / exh)Duration @ .050" (int / exh)Valve lift (int / exh)
5.7 Hemi 2003-08 without MDS5.7 Hemi2003-2008——0.472 / 0.460
5.7 Hemi 2005-08 with MDS5.7 Hemi2005-2008——0.472 / 0.460
5.7 Hemi Eagle VVT, car/SUV5.7 Hemi VVT, EZC, EZH2009 on258° / 288°——
5.7 Hemi Eagle VVT, Ram truck5.7 Hemi VVT2009 on268° / 290°—0.472 / 0.460
6.1 Hemi SRT86.1 SRT82005-2010283° / 286°221° / 225°0.571 / 0.551
6.4 / 392 Hemi Apache, car/SUV6.4 392, ESG, ESH2011 on286° / 288°——
6.2 supercharged Hemi6.2 SC2015 on278° / 304°——
6.2 supercharged Hemi, Demon / Hellcat Redeye / Super Stock6.2 SC Demon / Redeye / Super Stock2018-2023278° / 304°——

Valve lift is at the valve with the stock rocker ratio.

Calculators