B16, B17, B18 and B20 blocks come in two deck heights, which is why stroker and hybrid B builds start with the block choice. This chart lists the factory B-series camshafts with the figures confirmed by the factory or by two references that agree; a dash marks a B-series figure still unconfirmed or disputed.
Duration on the B-series cams is the factory figure, measured at the maker's own checking height, so compare it with an aftermarket B-series cam card only when the checking height is the same.
Compare a replacement cam with stock in the cam overlap and duration calculator, or let the cam selector size one for your combination.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Cam | Engine | Years | Market | Duration (int / exh) | Lobe height (int / exh) | Valve lift (int / exh) |
|---|---|---|---|---|---|---|
| Honda 'standard' B-series DOHC VTEC high lobes (Kojima's non-Type R group) | B16A, B16A1, B16A2, B16A3, B17A1, B18C1, B18C (JDM SiR-G) | — | all | — | — | — |
| Acura B18C1 1994-2001 Integra GS-R, high (VTEC mid) lobes | B18C1 | 1994-2001 Integra GS-R | US | 290° / — | 36.38 mm / 35.72 mm | 10.6 mm / 9.4 mm |
| Acura B18C1 1994-2001 Integra GS-R, primary (low-speed) lobes | B18C1 | — | US | — | 33.41 mm / 33.11 mm | — |
| Acura B18C1 1994-2001 Integra GS-R, secondary (low-speed) lobes | B18C1 | — | US | — | 34.55 mm / 34.38 mm | — |
| Honda B16A2 1999-2000 Civic Si (US), high (VTEC mid) lobes | B16A2 | 1999-2000 Civic Si | US | — | 36.27 mm / 35.72 mm | — |
| Honda B16A2 1996-2000 Civic (US), primary (low-speed) lobes | B16A2 | 1996-2000 Civic | US | — | 33.09 mm / 32.78 mm | — |
| Honda B16A2 1996-2000 Civic (US), secondary (low-speed) lobes | B16A2 | 1996-2000 Civic | US | — | 34.98 mm / 34.69 mm | — |
| Acura B18C5 1997-2001 Integra Type R (US), high (VTEC mid) lobes | B18C5 | 1997-2001 Integra Type R | US | — | 36.87 mm / 36.33 mm | 11.5 mm / 10.5 mm |
| Acura B18C5 1997-2001 Integra Type R, primary (low-speed) lobes | B18C5 | — | US | — | 33.09 mm / 32.78 mm | — |
| Acura B18C5 1997-2001 Integra Type R, secondary (low-speed) lobes | B18C5 | — | US | — | 34.73 mm / 34.69 mm | — |
| Honda B16B 1997-2000 Civic Type R (JDM EK9), high (VTEC mid) lobes | B16B | — | JDM | 294° / — | — | — |
| Acura/Honda B18B1 1994-2001 non-VTEC (Integra LS/RS/GS), single profile | B18B1 | — | US | — | 33.72 mm / 33.53 mm | — / 9.65 mm |
| Acura B18A1 1990-93 Integra (non-VTEC), single profile | B18A1 | — | US | — | 33.72 mm / 33.23 mm | — |
| Honda B20B 1997-98 CR-V, single profile | B20B | 1997-1998 CR-V | US | — | 33.2 mm / 33.53 mm | — |
Lobe height is the measured cam lobe; valve lift adds the rocker or follower ratio. LSA and overlap are worked out from the factory valve timing; on cams with variable timing they hold only at the cam position the timing is given for.