Nissan SR20 and RB Stock Cam Specs

The aluminum SR20 four and the iron-block RB20, RB25, RB26 and RB30 sixes cover most Nissan swap and turbo builds. This chart lists the factory SR20 and RB camshafts with the figures confirmed by the factory or by two references that agree; a dash marks a SR20 and RB figure still unconfirmed or disputed.

Duration on the SR20 and RB cams is the factory figure, measured at the maker's own checking height, so compare it with an aftermarket SR20 and RB cam card only when the checking height is the same.

Compare a replacement cam with stock in the cam overlap and duration calculator, or let the cam selector size one for your combination.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Nissan SR20 and RB factory cam specs

CamEngineYearsMarketDuration (int / exh)Valve eventsLSAOverlapLobe height (int / exh)Valve lift (int / exh)Variable timing
Nissan SR20DE high-port (US B13 Sentra SE-R / NX2000)SR20DE1994US240° / 240°IVO 13° BTDC, IVC 47° ABDC; EVO 57° BBDC, EVC 3° ATDC112°16°38.408-38.598 mm / 37.920-38.110 mm— / 9.2 mm—
Nissan SR20DE low-port (US 1995-99 200SX SE-R, 1998-99 Sentra SE)SR20DE1995-1999US232° / 240°IVO 5° BTDC, IVC 47° ABDC; EVO 57° BBDC, EVC 3° ATDC114°8°37.550-37.740 mm / 37.920-38.110 mm8.6 mm / 9.2 mm—
Nissan SR20DET S13 'redtop' high-port, no VTC (JDM PS13 Silvia/180SX)SR20DET1991-1993JDM——————none
Nissan SR20DET S14 (1994-98) low-port with intake VTC (VTC off)SR20DET1993-1998JDM240° / 240°IVO 6° ATDC, IVC 66° ABDC; EVO 53° BBDC, EVC 7° ATDC119.5°1°37.920-38.110 mm / 37.920-38.110 mm9.2 mm / 9.2 mmintake VTC
Nissan SR20DET S15 (1999-2002) low-port with intake VTC (VTC off)SR20DET1999-2002JDM240° / 240°IVO 6° ATDC, IVC 66° ABDC; EVO 53° BBDC, EVC 7° ATDC119.5°1°37.920-38.110 mm / 37.920-38.110 mm9.2 mm / 9.2 mmintake VTC
Nissan RB25DET R33 (non-NEO, hydraulic lifters, NVCS)RB25DET1993-1998JDM240° / 240°IVO 0° BTDC, IVC 60° ABDC; EVO 57° BBDC, EVC 3° ATDC118.5°3°39.705-39.895 mm / 39.705-39.895 mm—NVCS intake, two-position: 20 crank deg advance
Nissan RB26DETT standard (BNR32 / BCNR33 GT-R)RB26DETT1989-1998JDM240° / —IVO 7° BTDC, IVC 53° ABDC; EVO 63° BBDC, EVC 7° ATDC115.5°14°40.580-40.583 mm / 40.280-40.283 mm—none
Nissan RB26DETT N1 (BCNR33 N1)RB26DETT1995-1998JDM240° / —IVO 7° BTDC, IVC 53° ABDC; EVO 58° BBDC, EVC 2° ATDC115.5°9°——none

Lobe height is the measured cam lobe; valve lift adds the rocker or follower ratio. LSA and overlap are worked out from the factory valve timing; on cams with variable timing they hold only at the cam position the timing is given for.

Calculators