Valve Shim Chart

A shim chart is the shim formula worked out ahead of time: find your measured gap down the left side and your current shim across the top, and read the new shim where they cross. "OK" means the valve is already in spec, so leave it.

Your spec and shim steps may differ from these examples. For your exact numbers, every valve at once and swap suggestions, use the valve shim calculator or the motorcycle and ATV valve shim calculator.

Car shim chart for 0.05 mm shims (0.10–0.20 mm spec)

Measured gap (mm)2.50 shim2.60 shim2.70 shim2.80 shim2.90 shim3.00 shim
0.002.352.452.552.652.752.85
0.032.402.502.602.702.802.90
0.052.402.502.602.702.802.90
0.082.452.552.652.752.852.95
0.10OKOKOKOKOKOK
0.15OKOKOKOKOKOK
0.20OKOKOKOKOKOK
0.232.602.702.802.903.003.10
0.252.602.702.802.903.003.10
0.302.652.752.852.953.053.15
0.352.702.802.903.003.103.20
0.402.752.852.953.053.153.25

Target 0.15 mm, the middle of the spec. Typical of car shim-over-bucket kits sold in 0.05 mm steps.

For your own spec, every valve at once and shim swap suggestions, use the valve shim calculator.

Motorcycle shim chart for 0.025 mm shims (0.10–0.15 mm spec)

Measured gap (mm)1.60 shim1.70 shim1.80 shim1.90 shim2.00 shim
0.001.4751.5751.6751.7751.875
0.031.5001.6001.7001.8001.900
0.051.5251.6251.7251.8251.925
0.081.5501.6501.7501.8501.950
0.10OKOKOKOKOK
0.13OKOKOKOKOK
0.15OKOKOKOKOK
0.181.6501.7501.8501.9502.050
0.201.6751.7751.8751.9752.075
0.251.7251.8251.9252.0252.125
0.301.7751.8751.9752.0752.175

Target 0.125 mm. Bike shim kits usually come in 0.025 mm steps; many intake specs fall near 0.10–0.15 mm.

For your bike's spec, singles to fours and 4- or 5-valve heads, use the motorcycle and ATV valve shim calculator.

The formula behind the chart

New shim = current shim + (measured clearance − target clearance). A gap bigger than the spec takes a thicker shim; a smaller gap takes a thinner one. The chart rounds the result to the nearest shim in the kit, which always lands back inside the spec.

Measure cold, with the cam lobe pointing away from the bucket, and mic the old shim instead of trusting the number printed on it.

Calculators