Toyota 2JZ Cylinder Heads

The 2JZ-GE and 2JZ-GTE share one iron block, 86 mm bore and 86 mm stroke; the cams, heads and VVT-i vary by year and market. Below are the factory 2JZ heads with the specs confirmed by a factory manual or by two references that agree; a dash marks a 2JZ head figure still unconfirmed or disputed.

Changing 2JZ heads changes compression: put the chamber volume into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Toyota 2JZ factory heads

HeadEnginesYearsMarketMaterialValves per cylinderValves (int / exh)Valve stemChamber
Twin-cam 4-valve, shim-over-bucket2JZ-GTE1991-1998allaluminum433.6 mm / 29 mm5.970-5.985 mm45 cc
Twin-cam 4-valve, shim-over-bucket2JZ-GE1991-1997allaluminum433.6 mm / 29 mm5.970-5.985 mm—
Stock 2JZ head flow baselines2JZ—allaluminum433.6 mm / 29 mm——
As the GE head plus an intake cam phaser2JZ-GE—all——— / 29 mm——
As the non-VVT-i GTE head plus an intake cam phaser2JZ-GTE1997-2002 and laterJDM——— / 29 mm——

Flow is the stock intake port at 28 in. of water, shown only where two tests agree.

Calculators