Ford FE Cylinder Heads

Ford's FE engines, from the 332 through the 428, ran from 1958 to 1976 on one 4.63-inch bore spacing, with the 427 and the 428 Cobra Jet at the top of the line. Below are the factory FE heads with the specs confirmed by a factory manual or by two references that agree; a dash marks a FE head figure still unconfirmed or disputed.

Changing FE heads changes compression: put the chamber volume into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Ford FE factory heads

CastingYearsEnginesMaterialPortChamberValves (int / exh)
C1AE-A, C1SE-A, C3AE-C, C4AE-A, C4AE-G1961-1965352, 390———2.037" / 1.566"
C3AE-K, C4AE-F casting C4AE-6090-F1963-1969427 high risercast ironinline-valve wedge, high-riser port 1.34 x 2.72 in.86 cc minimum, fully machined2.190" / 1.730"
C5AE-F casting C5AE-6090-F, C5AE-R, C6AE-F1965-1967427 medium riser (W-code 4V, R-code 8V)cast ironinline-valve wedge, medium-riser port 1.34 x 2.06 in.86 cc minimum, fully machined2.195" / 1.733"
C6AE-J, C6AE-K, C6AE-R, C6AE-A/AA/AB/D, C6TE-B, C6TE-G, C7AE-A, C7AE-H, C6OE-R/Y/AA/AB/AC/H1966-1967352, 390 2V/4V/GT, 410 (Mercury), 428cast ironinline-valve wedge, standard FE port73.1-76.1 cc; 71.2-74.2 cc2.022"-2.037" / 1.551"-1.566"
C7OE-K casting C7OE-6090-K1967-1968427 tunnel portcast irontunnel port88 cc minimum, fully machined2.250" / 1.730"
C8AE-H, C8AE-A, C8AE-B, C8OE-A/B/F/XX1968-1976360 truck, 390 2V/4V, 390 GT, 428 (non-CJ)cast iron—67.1-70.1 cc; 68.1-71.1 cc2.022"-2.037"; 2.022"-2.040" / 1.551"-1.566"
C8OE-N casting C8OE-6090-N, C8OE-H casting C8OE-6090-H, Ford service heads C8OZ-6049-Fand C8OZ-6049-K1968-1970428 Cobra Jet (R/Q code), 428 Super Cobra Jet, 1968 GT500KR, 1969-70 Shelby GT500cast ironinline-valve wedge, Cobra Jet port 2.34 x 1.34 in.68 cc minimum, cast2.097" / 1.660"
C8AE-N, C8WE-A casting C8WE-6090-A, C8AE-6090-J1968427 4V hydraulic (390 hp, W code, Cougar/Fairlane)——72.7-75.7 cc2.080"-2.097" / 1.645"-1.660"
—1973330 MD, 330 HD, 361, 391cast ironinline-valve wedge, truck head78.5-81.5 cc1.745"-1.760" / 1.500"-1.515"; 1.500"-1.510"

Flow is the stock intake port at 28 in. of water, shown only where two tests agree.

Calculators