Gen III Hemi Cylinder Heads

The 5.7, 6.1, 6.4 and supercharged 6.2 Hemis use one bore spacing with different bores and decks, and the 2009-up Eagle heads changed the ports. Below are the factory Gen III Hemi heads with the specs confirmed by a factory manual or by two references that agree; a dash marks a Gen III Hemi head figure still unconfirmed or disputed.

Changing Gen III Hemi heads changes compression: put the chamber volume into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Gen III Hemi factory heads

CastingYearsEnginesMaterialPortChamberValves (int / exh)Intake portStock flow (peak, 28")
53021300AJ, 53021300BA2003-20085.7 Hemi (pre-Eagle)aluminumsquare intake85 cc2.000" / 1.550"161 cc—
5037369AA2005-20106.1 SRT8 (ESF)aluminumsquare intake, D-shaped exhaust74 cc2.080" / 1.600"188 cc—
53021616DD, 53021616DE2009-on5.7 Hemi VVT (Eagle)aluminumlarger square/rectangular intake65 cc2.050" / 1.550"——
5037369BD, 68166435AA-A022011-on6.4 392 car/SUV (ESG)aluminumsquare intake74 cc2.140" / 1.650"—342 cfm
05045468AE, 68166435AA / AB / AC / AD2014-on Ram HD6.4 Ram HD truck———2.140" / 1.650"——
5037369BD, 68166435AA / AA-A02 / AB / AC / AD, 5045468AE2015-on6.2 supercharged Hellcat (ESD)aluminum, 356——2.140" / 1.650"——
68166435AA / AB / AC / AD2018-20236.2 SC Demon / Hellcat Redeye / Super Stockaluminum, 356——2.140" / 1.650"——

Flow is the stock intake port at 28 in. of water, shown only where two tests agree.

Calculators