Honda B-Series Cylinder Heads

B16, B17, B18 and B20 blocks come in two deck heights, which is why stroker and hybrid B builds start with the block choice. Below are the factory B-series heads with the specs confirmed by a factory manual or by two references that agree; a dash marks a B-series head figure still unconfirmed or disputed.

Changing B-series heads changes compression: put the chamber volume into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Honda B-Series factory heads

HeadEnginesYearsMarketMaterialValves per cylinderValves (int / exh)Valve stemChamberStock flow (peak, 28")
VTEC headB16A, B16A1, B16A2, B16A31989-2000allaluminum433 mm / 28 mm5.48 mm42.7 cc—
P75 (B18B1); PR4 (B18A1/A2)B18A1, B18B1, B20B (head 'P75-5')—allaluminum431 mm / 28 mm6.58 mm45 cc—
P72B18C1, B18C (JDM SiR-G)1994-2001allaluminum433 mm / 28 mm5.48 mm41.6 cc256 cfm
P73 (JDM Type R ECU code; casting not verified)B18C5, B18C (JDM DC2 Type R)1995-2001allaluminum433 mm / 28 mm5.48 mm——
PCTB16B1997-2000JDM—4————
non-VTEC DOHCB20B, B20Z2—all——31 mm / 28 mm6.58 mm——

Flow is the stock intake port at 28 in. of water, shown only where two tests agree.

Calculators