Honda K-Series Cylinder Heads

The K20 and K24 share a head design but not a deck height: the K24's taller block carries a longer stroke. Below are the factory K-series heads with the specs confirmed by a factory manual or by two references that agree; a dash marks a K-series head figure still unconfirmed or disputed.

Changing K-series heads changes compression: put the chamber volume into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Honda K-Series factory heads

HeadEnginesYearsMarketMaterialValves per cylinderValves (int / exh)Valve stemChamberStock flow (peak, 28")
2007-11: intake and exhaust port surfaces smoothed NSX-R styleK20A2001-2011JDM—435 mm / 30 mm———
Front intake, rear exhaustK20A2, K20Z12002-2006USaluminum435 mm / 30 mm5.48 mm50.5 cc295 cfm
PPA (K24A1); RAA (K24A4/K24A8)K24A1, K24A4, K24A8—US—435 mm / 30 mm5.48 mm——
Pent-roof chambers with large squish areasK24A22004-2005USaluminum435 mm / 30 mm———
—K24A2—US—4— / 30 mm———
—K20Z32006-2011USaluminum435 mm / 30 mm5.48 mm50.5 cc—

Flow is the stock intake port at 28 in. of water, shown only where two tests agree.

Calculators