Mopar LA and Magnum Small Block Cylinder Heads

Chrysler's LA engines (273, 318, 340, 360) and the later 5.2 and 5.9 Magnums share a block design, so most crank and rod math carries across the family. Below are the factory Mopar small block heads with the specs confirmed by a factory manual or by two references that agree; a dash marks a Mopar small block head figure still unconfirmed or disputed.

Changing Mopar small block heads changes compression: put the chamber volume into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.

Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit

Mopar LA and Magnum Small Block factory heads

CastingYearsEnginesMaterialPortChamberValves (int / exh)
2465315, 2532080, 2536178, 2658234, 2658920, 28436751964-1970273 2-bbl, 273 4-bbl, 318 2-bbl (1967-70)cast iron——1.780" / —
25318941968-1970340 4-bblcast iron—68 cc2.020" / 1.600"
34189151970-1972340 4-bbl, 360cast iron——— / 1.600"
34625981970340 6-bbl (T/A, AAR)cast iron——2.020" / 1.600"
—1971-1986318 2-bblcast iron——1.780" / 1.500"
36715871973-1976340 4-bbl, 360cast iron——1.880" / 1.600"
—1975-1986360 2-bbl, 360 4-bbl, 318 HP (596, 051)cast iron——1.880" / —
—1983-1987318 4-bbl / policecast iron———
43233021985-1986318 2-bblcast ironLA wedge, small intake port, heart-shaped fast-burn chamber—1.780" / 1.500"
44483081989-19925.9 (360) LA truckcast iron———
—1992-20035.2 Magnum, 5.9 Magnumcast ironMagnum wedge, high-swirl shrouded chamber, 5/16 in. stems—1.920" / 1.625"

Flow is the stock intake port at 28 in. of water, shown only where two tests agree.

Calculators