The aluminum SR20 four and the iron-block RB20, RB25, RB26 and RB30 sixes cover most Nissan swap and turbo builds. Below are the factory SR20 and RB heads with the specs confirmed by a factory manual or by two references that agree; a dash marks a SR20 and RB head figure still unconfirmed or disputed.
Changing SR20 and RB heads changes compression: put the chamber volume into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Head | Engines | Years | Market | Material | Valves per cylinder | Valves (int / exh) | Valve stem | Chamber |
|---|---|---|---|---|---|---|---|---|
| RB26 DOHC 24-valve, shim-under-bucket solid lifters, symmetrical exhaust ports | RB26DETT | 1989-1998 | JDM | aluminum | 4 | 34.5 mm / 30 mm | intake 5.965-5.980, exhaust 6.905-6.920 mm | 70 cc |
| high-port, no VTC | SR20DET | 1991-1993 | JDM | — | — | — | — | 46-46.5 cc |
| low-port with intake VTC | SR20DET | 1993-1998 | JDM | aluminum | 4 | 34 mm / 30 mm | intake 5.965-5.980, exhaust 6.945-6.960 mm | 46-46.5 cc |
| RB25 DOHC 24-valve head with hydraulic bucket lifters and intake NVCS | RB25DE, RB25DET | 1993-1998 | JDM | aluminum | 4 | 34 mm / — | intake 5.965-5.980, exhaust 5.945-5.960 mm | — |
| high-port | SR20DE | 1994 | US | aluminum | 4 | 34 mm / 30 mm | intake 5.965-5.980, exhaust 5.945-5.960 mm | — |
| low-port | SR20DE | 1995-1999 | US | aluminum | 4 | 34 mm / 30 mm | intake 5.965-5.980, exhaust 5.945-5.960 mm | — |
| low-port with intake VTC | SR20DET | 1999-2002 | JDM | aluminum | 4 | 34 mm / 30 mm | intake 5.965-5.980, exhaust 6.945-6.960 mm | 46-46.5 cc |
Flow is the stock intake port at 28 in. of water, shown only where two tests agree.