The 221, 260, 289, 302/5.0 and 351 Windsor share a bore spacing but split into two deck heights, which decides which crank and rod combinations fit. Below are the factory small-block Ford heads with the specs confirmed by a factory manual or by two references that agree; a dash marks a small-block Ford head figure still unconfirmed or disputed.
Changing small-block Ford heads changes compression: put the chamber volume into the compression ratio calculator, and turn flow numbers into power with the head flow calculator.
Work in progress. We are still filling these tables in from factory manuals and parts makers' catalogs, and a dash means we have not confirmed that figure from two sources yet. Have a figure we are missing, or see one that is wrong? Suggest an edit
| Casting | Years | Engines | Material | Port | Chamber | Valves (int / exh) | Intake port | Stock flow (peak, 28") |
|---|---|---|---|---|---|---|---|---|
| C2OE-A, C2OE-B, C2OE-C, C2OE-D, C2OE-E, C3OE-A | 1962-1963 | 221 | cast iron | inline-valve wedge | 45-51 cc | 1.590" / 1.390" | — | — |
| C2OE-F, C3OE-B | 1962 to February 1964 | 260 | cast iron | inline-valve wedge | 54.5 cc | 1.590" / 1.390" | — | — |
| C3AE-F, C3OE-E, C3OE-F, C4AE-C, C5DE-B, C6OE-M, C6OE-C / C6OE-E | 1963-1966 | C (289 2V), A (289 4V) | cast iron | inline-valve wedge | 54.5 cc | 1.670" / 1.450" | — | — |
| C3OE | 1963-early 1964 | K (289 Hi-Po) | cast iron | inline-valve wedge | 49.2 cc | 1.670" / 1.450" | — | — |
| C4OE-B | February 1964 to 1964 | 260 | cast iron | inline-valve wedge | 54.5 cc | 1.670" / 1.450" | — | — |
| C5OE-A, C5AE-E, C4OE-B, C5AE, C7ZE-A, C8ZE-B | mid-1964 to 1967 | K (289 Hi-Po) | cast iron | inline-valve wedge | 54.5 cc | 1.780" / 1.450" | — | — |
| C7OE-A, C7OE-B, C7OE-C, C7OZ-B | 1967 | C (289 2V), A (289 4V) | cast iron | inline-valve wedge | 52.0-55.0 cc | 1.780" / 1.450" | — | — |
| C8OE-J, C8OE-K, C8OE-L, C8OE-M, C7OE-C, C7OE-G, C8AE-J, C8DE-F, C7OE-D, C8OE-A / C8OE-F | 1968-1970 | 302 2V, J (1968 302 4V) | cast iron | inline-valve wedge | 60.5-63.5 cc; J-code 302 cc 4 ccV 52.0-55.0 cc | 1.773"-1.783" / 1.442"-1.457" | — | — |
| C9OE-B, C9OE-D, D0OE-C, D0OE-G, D1OE / D1OE-BA, D0OZ-C | 1969-1974 | 351W 2V, 351W 4V (1969-70) | cast iron | inline-valve wedge | 60.4 cc | 1.840" / 1.540" | — | — |
| C9ZE-6090-A, C9ZE-6090-C, C9ZE-A | 1969 | G (Boss 302) | cast iron | canted-valve | 63 cc | 2.230" / 1.710" | — | — |
| D0OE-B, D2OE-BA, D1TZ-A, D2OE-DA, D3VE-AA | 1970-1974 | 302 2V | cast iron | inline-valve wedge | 58.2 cc | 1.780" / 1.450" | — | — |
| D0ZE-A, D0ZE-B, D0ZE-6090-A, D0ZE-6090-B, D1ZE-A; D1ZE-6090-AA | 1970 | G (Boss 302) | cast iron | canted-valve | 58 cc | 2.190" / 1.710" | — | — |
| D5OE-GA, D5OE-A3A, D5OE-A3B, D5OE-A, D5OE-AB, D5DE-AE, D5AE-CA | 1975-1976 | 302 2V | cast iron | inline-valve wedge | 56.7-59.7 cc | 1.780" / 1.450" | — | — |
| — | 1975-1976 | 351W 2V | cast iron | inline-valve wedge | 58.9-61.9 cc | 1.780" / 1.450" | — | — |
| D7OE-DA, D8OE-AB, D9AE-AA, D7OE-A, D7OE-DC, D7OE-GB, D8OE-A, D8OE-CB, D8OE-DA, D8TE-AB, D8TE-BB | 1977-1984 | 302 2V, 351W 2V | cast iron | inline-valve wedge | 69 cc | 1.780" / 1.450" | — | — |
| E0SE-AB | 1980-1982 | 255 (4.2L) | cast iron | inline-valve wedge, small round | — | — | — | — |
| E5AE-CA, E5TE-AB, E6AE-AA, E5AE-AB, E5TZ | 1985-1986 | 5.0 HO (Mustang), 5.0 (car) | cast iron | inline-valve wedge | — | — | — | — |
| — | 1987-1993 trucks | 5.8L truck/van (F-series, Bronco, Econoline) | cast iron | inline-valve wedge | 60.6-63.6 cc | 1.780" / 1.460" | — | — |
| — | 1987-1993 trucks | 5.0L EFI truck/van | cast iron | inline-valve wedge | 60.6-63.6 cc | 1.690" / 1.450" | — | — |
| E7TE-PA | 1987-1995 | 5.0 HO | cast iron | inline-valve wedge | — | 1.780" / 1.460" | 127 cc | 160 cfm |
| F3ZE-AA, F4ZE-AA, F2PE | 1993-1995 Mustang SVT Cobra and F-150 SVT Lightning | 5.0 Cobra, 5.8 Lightning | cast iron | inline-valve wedge | 60.6-63.6 cc | 1.840" / 1.540" | — | — |
| — | 1996 to mid-1997 Explorer/Mountaineer 5.0 | 5.0 Explorer/Mountaineer | cast iron | inline-valve wedge | — | — | — | — |
| — | mid-1997 to 2001 Explorer/Mountaineer 5.0 | 5.0 Explorer/Mountaineer | cast iron | inline-valve wedge | 59 cc | 1.840" / 1.460" | — | 195 cfm |
Flow is the stock intake port at 28 in. of water, shown only where two tests agree.