See other engines in this family
American Motors 258ci (1971–1980) specs: 258 ci (4.2L) 6-cylinder, 3.75 x 3.90 in (95.3 x 99.1 mm) bore and stroke. Rated 110-150 hp, 1971–1980.
The American Motors 258ci (1971–1980) is close to square: 3.75" bore against 3.9" stroke, within 3.8%, which splits the difference between a high-revving layout and a torque layout. The 3.9" stroke puts mean piston speed at 4,000 ft/min around 6,150 RPM, which is where a production bottom end is generally considered at its limit. A rod ratio of 1.506 is short — higher piston acceleration and more side-load, typical of stroker combinations and a reason to watch piston speed closely. Each of the 6 cylinders displaces 43.0 ci (705 cc).
It is one of 2 engines in the American Motors 258ci family, all of them 258 ci — the differences between them are in compression, heads and rating, not displacement. 8 factory variants share these dimensions, rated from 110 to 150 hp across 1971–1980.
| Displacement | 258 ci / 4.2 L |
|---|---|
| Bore | 3.75" |
| Stroke | 3.9" |
| Cylinders | 6 |
| Configuration | I6 |
| Rod length | 5.875" |
| Rod ratio | 1.506 |
| Bore/stroke ratio | 0.962 |
| Fuel type | gas |
|---|---|
| Advertised HP | 110–150 hp |
| Years | 1971–1980 |
| Bore/stroke character | 0.962 — square — bore and stroke are within 5%, a balanced compromise |
|---|---|
| Mean piston speed at 6,000 RPM | 3,900 ft/min — in the range typical of performance street engines |
| Rod ratio | 1.506 — short — more side loading and piston dwell at TDC, typical of stroker combinations |
| Displacement per cylinder | 43.0 ci |
Each link opens the calculator with this engine's specs already filled in.
These records share identical bore, stroke, displacement and compression. They differ by model year and factory power rating.
| Year | Advertised HP | Code |
|---|---|---|
| 1971 | 150 hp | — |
| 1972 | 110 hp | — |
| 1973 | 110 hp | — |
| 1974 | 110 hp | — |
| 1977 | — | — |
| 1978 | — | — |
| 1979 | — | — |
| 1980 | — | — |