See other engines in this family
Chrysler 122ci 3.31" bore specs: 122 ci (2.0L) 4-cylinder, 3.31 x 3.54 in (84.1 x 89.9 mm) bore and stroke. Built 1974–1977. Rod ratio and piston speed.
With a 3.54" stroke over a 3.31" bore, the Chrysler 122ci 3.31" bore is undersquare by 6.5%, so expect the 122 to pull low rather than rev. Piston speed on the 122 (3.54" stroke) gets to 4,000 ft/min near 6,800 rpm, the usual ceiling for stock rods and pistons. The 122's 1.846 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 122's 4 cylinders displaces 30.5 ci (500 cc).
The Chrysler 122ci family has 2 engines, all 122 ci, so what sets the 122 apart is its compression, heads and power rating. The factory built 4 versions on these dimensions, from 1974 to 1977.
| Displacement | 122 ci / 2 L |
|---|---|
| Bore | 3.31" |
| Stroke | 3.54" |
| Cylinders | 4 |
| NHRA blueprint max. compression | 9.31:1 |
| Rod length | 6.535" |
| Rod ratio | 1.846 |
| Bore/stroke ratio | 0.935 |
| Piston deck clearance | 0.000" (zero deck) |
| Induction | 1-2 |
|---|---|
| NHRA filed HP | 96 hp |
| Years | 1974–1977 |
| Bore/stroke character | 0.935, undersquare, favors low-end torque |
|---|---|
| Mean piston speed at 6,000 RPM | 3,540 ft/min (typical performance street range) |
| Rod ratio | 1.846 (long, less side load on the bores) |
| Displacement per cylinder | 30.5 ci |
| Intake valve diameter | 1.7" |
|---|---|
| Exhaust valve diameter | 1.38" |
| Chamber volume | 49.8 cc |
| Rocker ratio | 1.55:1 |
| Lifter type | mechanical |
These open with the 122's bore, stroke and compression already entered.
All 4 versions of the 122 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 1974 | 94 hp | — |
| 1975 | 94 hp | — |
| 1976 | 96 hp | — |
| 1977 | 96 hp | — |