Chrysler 122ci 3.31" bore Specs: 3.31 x 3.54 in

See other engines in this family

The same engine also has a main page: Chrysler 122ci 3.31" bore.

Chrysler 122ci 3.31" bore specs: 122 ci (2.0L) 4-cylinder, 3.31 x 3.54 in (84.1 x 89.9 mm) bore and stroke. Built 1978–1979. Rod ratio and piston speed.

With a 3.54" stroke over a 3.31" bore, the Chrysler 122ci 3.31" bore is undersquare by 6.5%, so expect the 122 to pull low rather than rev. Piston speed on the 122 (3.54" stroke) gets to 4,000 ft/min near 6,800 rpm, the usual ceiling for stock rods and pistons. The 122's 1.846 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 122's 4 cylinders displaces 30.5 ci (500 cc).

The Chrysler 122ci family has 2 engines, all 122 ci, so what sets the 122 apart is its compression, heads and power rating. The factory built 2 versions on these dimensions, from 1978 to 1979.

Dimensions

Displacement122 ci / 2 L
Bore3.31"
Stroke3.54"
Cylinders4
NHRA blueprint max. compression9.1:1
Rod length6.535"
Rod ratio1.846
Bore/stroke ratio0.935
Piston deck clearance0.000" (zero deck)

Construction

Induction1-2
NHRA filed HP93 hp
Years1978–1979

What these numbers mean

Bore/stroke character0.935, undersquare, favors low-end torque
Mean piston speed at 6,000 RPM3,540 ft/min (typical performance street range)
Rod ratio1.846 (long, less side load on the bores)
Displacement per cylinder30.5 ci

Cylinder head

Intake valve diameter1.7"
Exhaust valve diameter1.38"
Chamber volume50.2 cc
Rocker ratio1.55:1
Lifter typemechanical

Run the numbers for this engine

These open with the 122's bore, stroke and compression already entered.

Variants sharing these dimensions (2)

All 2 versions of the 122 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
197893 hp—
197993 hp—

Similar engines

← All Chrysler 122ci engines