Chrysler 152ci 3.44" bore Specs: 3.44 x 4.095 in

See other engines in this family

Chrysler 152ci 3.44" bore specs: 152 ci (2.5L) 4-cylinder, 3.44 x 4.095 in (87.4 x 104 mm) bore and stroke. Built 1986–1987. Rod ratio and piston speed.

With a 4.095" stroke over a 3.44" bore, the Chrysler 152ci 3.44" bore is undersquare by 16.0%, so expect the 152 to pull low rather than rev. Piston speed on the 152 (4.095" stroke) gets to 4,000 ft/min near 5,850 rpm, the usual ceiling for stock rods and pistons. Each of the 152's 4 cylinders displaces 38.0 ci (623 cc).

The factory built 2 versions on these dimensions, from 1986 to 1987.

Dimensions

Displacement152 ci / 2.5 L
Bore3.44"
Stroke4.095"
Cylinders4
NHRA blueprint max. compression10.1:1
Bore/stroke ratio0.84
Piston deck clearance0.000" (zero deck)

Construction

InductionTBI
NHRA filed HP100 hp
Years1986–1987

What these numbers mean

Bore/stroke character0.840, undersquare, favors low-end torque
Mean piston speed at 6,000 RPM4,095 ft/min (typical performance street range)
Displacement per cylinder38.0 ci

Cylinder head

Intake valve diameter1.598"
Exhaust valve diameter1.394"
Chamber volume44.1 cc
Rocker ratio1.61:1
Lifter typehydraulic

Run the numbers for this engine

These open with the 152's bore, stroke and compression already entered.

Variants sharing these dimensions (2)

All 2 versions of the 152 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
1986100 hp—
1987100 hp—

Similar engines

← All Chrysler 152ci engines