See other engines in this family
The same engine also has a main page: Chrysler 156ci 3.59" bore.
Chrysler 155ci 3.59" bore specs: 155 ci (2.5L) 4-cylinder, 3.59 x 3.86 in (91.2 x 98 mm) bore and stroke. Built 1984–1985. Rod ratio and piston speed.
The Chrysler 155ci 3.59" bore has more stroke than bore (3.86" against 3.59", 7.0% undersquare), a torque layout rather than a revving one. Spin the 155 to about 6,200 rpm and its 3.86" stroke is moving the pistons at 4,000 ft/min, roughly the safe limit for a stock bottom end. The 155's rod ratio of 1.693 is in the normal range for a production engine. Each of the 155's 4 cylinders displaces 38.8 ci (635 cc).
The factory built 2 versions on these dimensions, from 1984 to 1985.
| Displacement | 155 ci / 2.5 L |
|---|---|
| Bore | 3.59" |
| Stroke | 3.86" |
| Cylinders | 4 |
| NHRA blueprint max. compression | 10.55:1 |
| Rod length | 6.535" |
| Rod ratio | 1.693 |
| Bore/stroke ratio | 0.93 |
| Piston deck clearance | 0.000" (zero deck) |
| Induction | 1-2 |
|---|---|
| NHRA filed HP | 101 hp |
| Years | 1984–1985 |
| Bore/stroke character | 0.930, undersquare, favors low-end torque |
|---|---|
| Mean piston speed at 6,000 RPM | 3,860 ft/min (typical performance street range) |
| Rod ratio | 1.693 (normal for a production engine) |
| Displacement per cylinder | 38.8 ci |
| Intake valve diameter | 1.8" |
|---|---|
| Exhaust valve diameter | 1.5" |
| Chamber volume | 50.2 cc |
| Rocker ratio | 1.55:1 |
| Lifter type | mechanical |
These open with the 155's bore, stroke and compression already entered.
All 2 versions of the 155 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 1984 | 101 hp | — |
| 1985 | 101 hp | — |