Chrysler 156ci 3.59" bore Specs: 3.59 x 3.86 in

See other engines in this family

Chrysler 156ci 3.59" bore specs: 156 ci (2.6L) 4-cylinder, 3.59 x 3.86 in (91.2 x 98 mm) bore and stroke. Built 1982–1983. Used in the Dodge Challenger.

The Chrysler 156ci 3.59" bore has more stroke than bore (3.86" against 3.59", 7.0% undersquare), a torque layout rather than a revving one. Spin the 156 to about 6,200 rpm and its 3.86" stroke is moving the pistons at 4,000 ft/min, roughly the safe limit for a stock bottom end. The 156's rod ratio of 1.693 is in the normal range for a production engine. Each of the 156's 4 cylinders displaces 39.0 ci (639 cc).

The Chrysler 156ci family has 5 engines, all 156 ci, so what sets the 156 apart is its compression, heads and power rating. The factory built 5 versions on these dimensions, from 1982 to 1983.

Dimensions

Displacement156 ci / 2.6 L
Bore3.59"
Stroke3.86"
Cylinders4
NHRA blueprint max. compression9.8:1
Rod length6.535"
Rod ratio1.693
Bore/stroke ratio0.93
Piston deck clearance0.000" (zero deck)

Construction

Induction1-2
NHRA filed HP105 hp
Years1982–1983

What these numbers mean

Bore/stroke character0.930, undersquare, favors low-end torque
Mean piston speed at 6,000 RPM3,860 ft/min (typical performance street range)
Rod ratio1.693 (normal for a production engine)
Displacement per cylinder39.0 ci

Cylinder head

Intake valve diameter1.8"
Exhaust valve diameter1.5"
Chamber volume50.2 cc
Rocker ratio1.55:1
Lifter typemechanical

Run the numbers for this engine

These open with the 156's bore, stroke and compression already entered.

Variants sharing these dimensions (5)

All 5 versions of the 156 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
198292 hp—
1982100 hp—
1982105 hp—
198393 hp—
1983103 hp—

What cars have the Chrysler 156ci · 3.59" × 3.86"?

2 factory vehicles, 1978–1983. Each year opens that model's engine table.

Similar engines

← All Chrysler 156ci engines