Chrysler 170ci 3.406" bore Specs: 3.406 x 3.125 in

See other engines in this family

Chrysler 170ci 3.406" bore specs: 170 ci (2.8L) 6-cylinder, 3.406 x 3.125 in (86.5 x 79.4 mm) bore and stroke. Built 1960–1969.

The Chrysler 170ci 3.406" bore is oversquare: its 3.406" bore is 9.0% bigger than its 3.125" stroke. The big bore leaves room for big valves, so the 170 leans toward airflow and rpm. The 170's 3.125" stroke doesn't reach 4,000 ft/min of piston speed until about 7,700 rpm, so the valvetrain and breathing run out before the pistons do. The 170's 1.827 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 170's 6 cylinders displaces 28.3 ci (464 cc).

The Chrysler 170ci family has 4 engines, all 170 ci, so what sets the 170 apart is its compression, heads and power rating. The factory built 8 versions on these dimensions, from 1960 to 1969.

Dimensions

Displacement170 ci / 2.8 L
Bore3.406"
Stroke3.125"
Cylinders6
NHRA blueprint max. compression8.5:1
Rod length5.71"
Rod ratio1.827
Bore/stroke ratio1.09
Piston deck clearance0.020" below deck

Construction

Induction1-1
NHRA filed HP115 hp
Years1960–1969

What these numbers mean

Bore/stroke character1.090, oversquare, favors rpm and big valves
Mean piston speed at 6,000 RPM3,125 ft/min (easy for a street engine)
Rod ratio1.827 (long, less side load on the bores)
Displacement per cylinder28.3 ci

Cylinder head

Intake valve diameter1.62"
Exhaust valve diameter1.36"
Chamber volume52.3 cc
Rocker ratio1.5:1
Lifter typemechanical

Run the numbers for this engine

These open with the 170's bore, stroke and compression already entered.

Variants sharing these dimensions (8)

All 8 versions of the 170 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
1960101 hp—
1964101 hp—
1965101 hp—
1966101 hp—
1967101 hp—
1967115 hp—
1968115 hp—
1969115 hp—

Similar engines

← All Chrysler 170ci engines