Chrysler 170ci 3.406" bore Specs: 3.406 x 3.125 in

See other engines in this family

The same engine also has a main page: Chrysler 170ci 3.406" bore.

Chrysler 170ci 3.406" bore specs: 170 ci (2.8L) 6-cylinder, 3.406 x 3.125 in (86.5 x 79.4 mm) bore and stroke. Built 1961. Rod ratio and piston speed.

The Chrysler 170ci 3.406" bore is oversquare: its 3.406" bore is 9.0% bigger than its 3.125" stroke. The big bore leaves room for big valves, so the 170 leans toward airflow and rpm. The 170's 3.125" stroke doesn't reach 4,000 ft/min of piston speed until about 7,700 rpm, so the valvetrain and breathing run out before the pistons do. The 170's 1.827 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 170's 6 cylinders displaces 28.3 ci (464 cc).

The Chrysler 170ci family has 4 engines, all 170 ci, so what sets the 170 apart is its compression, heads and power rating.

Dimensions

Displacement170 ci / 2.8 L
Bore3.406"
Stroke3.125"
Cylinders6
NHRA blueprint max. compression11.7:1
Rod length5.71"
Rod ratio1.827
Bore/stroke ratio1.09
Piston deck clearance0.030" below deck

Construction

Induction1-4
NHRA filed HP148 hp
Years1961

What these numbers mean

Bore/stroke character1.090, oversquare, favors rpm and big valves
Mean piston speed at 6,000 RPM3,125 ft/min (easy for a street engine)
Rod ratio1.827 (long, less side load on the bores)
Displacement per cylinder28.3 ci

Cylinder head

Intake valve diameter1.62"
Exhaust valve diameter1.36"
Chamber volume52.3 cc
Rocker ratio1.5:1
Lifter typemechanical

Run the numbers for this engine

These open with the 170's bore, stroke and compression already entered.

Similar engines

← All Chrysler 170ci engines