See other engines in this family
The same engine also has a main page: Chrysler 198ci 3.406" bore.
Chrysler 198ci 3.406" bore specs: 198 ci (3.2L) 6-cylinder, 3.406 x 3.64 in (86.5 x 92.5 mm) bore and stroke. Built 1970–1971.
With a 3.64" stroke over a 3.406" bore, the Chrysler 198ci 3.406" bore is undersquare by 6.4%, so expect the 198 to pull low rather than rev. Piston speed on the 198 (3.64" stroke) gets to 4,000 ft/min near 6,600 rpm, the usual ceiling for stock rods and pistons. The 198's 1.841 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 198's 6 cylinders displaces 33.0 ci (541 cc).
The Chrysler 198ci family has 2 engines, all 198 ci, so what sets the 198 apart is its compression, heads and power rating. The factory built 2 versions on these dimensions, from 1970 to 1971.
| Displacement | 198 ci / 3.2 L |
|---|---|
| Bore | 3.406" |
| Stroke | 3.64" |
| Cylinders | 6 |
| NHRA blueprint max. compression | 8.8:1 |
| Rod length | 6.7" |
| Rod ratio | 1.841 |
| Bore/stroke ratio | 0.936 |
| Piston deck clearance | 0.077" below deck |
| Induction | 1-1 |
|---|---|
| NHRA filed HP | 125 hp |
| Years | 1970–1971 |
| Bore/stroke character | 0.936, undersquare, favors low-end torque |
|---|---|
| Mean piston speed at 6,000 RPM | 3,640 ft/min (typical performance street range) |
| Rod ratio | 1.841 (long, less side load on the bores) |
| Displacement per cylinder | 33.0 ci |
| Intake valve diameter | 1.62" |
|---|---|
| Exhaust valve diameter | 1.36" |
| Chamber volume | 53.8 cc |
| Rocker ratio | 1.5:1 |
| Lifter type | mechanical |
These open with the 198's bore, stroke and compression already entered.
All 2 versions of the 198 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 1970 | 125 hp | — |
| 1971 | 125 hp | — |