Chrysler 198ci 3.406" bore Specs: 3.406 x 3.64 in

See other engines in this family

Chrysler 198ci 3.406" bore specs: 198 ci (3.2L) 6-cylinder, 3.406 x 3.64 in (86.5 x 92.5 mm) bore and stroke. Built 1972–1974.

With a 3.64" stroke over a 3.406" bore, the Chrysler 198ci 3.406" bore is undersquare by 6.4%, so expect the 198 to pull low rather than rev. Piston speed on the 198 (3.64" stroke) gets to 4,000 ft/min near 6,600 rpm, the usual ceiling for stock rods and pistons. The 198's 1.841 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 198's 6 cylinders displaces 33.0 ci (541 cc).

The Chrysler 198ci family has 2 engines, all 198 ci, so what sets the 198 apart is its compression, heads and power rating. The factory built 3 versions on these dimensions, from 1972 to 1974.

Dimensions

Displacement198 ci / 3.2 L
Bore3.406"
Stroke3.64"
Cylinders6
NHRA blueprint max. compression8.93:1
Rod length6.7"
Rod ratio1.841
Bore/stroke ratio0.936
Piston deck clearance0.075" below deck

Construction

Induction1-1
NHRA filed HP100 hp
Years1972–1974

What these numbers mean

Bore/stroke character0.936, undersquare, favors low-end torque
Mean piston speed at 6,000 RPM3,640 ft/min (typical performance street range)
Rod ratio1.841 (long, less side load on the bores)
Displacement per cylinder33.0 ci

Cylinder head

Intake valve diameter1.62"
Exhaust valve diameter1.36"
Chamber volume54 cc
Rocker ratio1.5:1
Lifter typemechanical

Run the numbers for this engine

These open with the 198's bore, stroke and compression already entered.

Variants sharing these dimensions (3)

All 3 versions of the 198 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
1972100 hp—
197395 hp—
197495 hp—

Similar engines

← All Chrysler 198ci engines