See other engines in this family
The same engine also has a main page: Chrysler 273ci 3.63" bore.
Chrysler 273ci 3.63" bore specs: 273 ci (4.5L) 8-cylinder, 3.63 x 3.313 in (92.2 x 84.2 mm) bore and stroke. Built 1968–1969. Rod ratio and piston speed.
The Chrysler 273ci 3.63" bore has more bore than stroke (3.63" against 3.313", 9.6% oversquare), the layout that likes rpm and big valves. The 273's 3.313" stroke doesn't reach 4,000 ft/min of piston speed until about 7,250 rpm, so the valvetrain and breathing run out before the pistons do. The 273's 1.848 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 273's 8 cylinders displaces 34.1 ci (559 cc).
The Chrysler 273ci family has 3 engines, all 273 ci, so what sets the 273 apart is its compression, heads and power rating. The factory built 2 versions on these dimensions, from 1968 to 1969.
| Displacement | 273 ci / 4.5 L |
|---|---|
| Bore | 3.63" |
| Stroke | 3.313" |
| Cylinders | 8 |
| NHRA blueprint max. compression | 9:1 |
| Rod length | 6.123" |
| Rod ratio | 1.848 |
| Bore/stroke ratio | 1.096 |
| Piston deck clearance | 0.022" above deck |
| Induction | 1-2 |
|---|---|
| NHRA filed HP | 190 hp |
| Years | 1968–1969 |
| Bore/stroke character | 1.096, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,313 ft/min (easy for a street engine) |
| Rod ratio | 1.848 (long, less side load on the bores) |
| Displacement per cylinder | 34.1 ci |
| Intake valve diameter | 1.78" |
|---|---|
| Exhaust valve diameter | 1.5" |
| Chamber volume | 60.6 cc |
| Rocker ratio | 1.5:1 |
| Lifter type | hydraulic |
These open with the 273's bore, stroke and compression already entered.
All 2 versions of the 273 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 1968 | 190 hp | — |
| 1969 | 190 hp | — |