See other engines in this family
The same engine also has a main page: Chrysler 340ci 4.04" bore.
Chrysler 340ci 4.04" bore specs: 340 ci (5.6L) 8-cylinder, 4.04 x 3.313 in (102.6 x 84.2 mm) bore and stroke. Built 1971. Rod ratio and piston speed.
The Chrysler 340ci 4.04" bore is oversquare: its 4.04" bore is 21.9% bigger than its 3.313" stroke. The big bore leaves room for big valves, so the 340 leans toward airflow and rpm. The 340's 3.313" stroke doesn't reach 4,000 ft/min of piston speed until about 7,250 rpm, so the valvetrain and breathing run out before the pistons do. The 340's 1.848 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 340's 8 cylinders displaces 42.5 ci (696 cc).
The Chrysler 340ci family has 3 engines, all 340 ci, so what sets the 340 apart is its compression, heads and power rating.
| Displacement | 340 ci / 5.6 L |
|---|---|
| Bore | 4.04" |
| Stroke | 3.313" |
| Cylinders | 8 |
| NHRA blueprint max. compression | 11.8:1 |
| Rod length | 6.123" |
| Rod ratio | 1.848 |
| Bore/stroke ratio | 1.219 |
| Deck height | 9.6" |
| Piston deck clearance | 0.045" above deck |
| Induction | 1-4 |
|---|---|
| NHRA filed HP | 275 hp |
| Years | 1971 |
| Engine weight | 525–550 lb (approximate; published figures vary with what is attached) |
| Bore/stroke character | 1.219, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,313 ft/min (easy for a street engine) |
| Rod ratio | 1.848 (long, less side load on the bores) |
| Displacement per cylinder | 42.5 ci |
| Intake valve diameter | 2.02" |
|---|---|
| Exhaust valve diameter | 1.6" |
| Chamber volume | 63.3 cc |
| Rocker ratio | 1.5:1 |
| Lifter type | hydraulic |
These open with the 340's bore, stroke and compression already entered.