Chrysler Mopar Crate and Drag Pak 3.920" bore Specs: 3.92 x 3.58 in, 305 hp

See other engines in this family

Chrysler Mopar Crate and Drag Pak 3.920" bore specs: 345 ci (5.7L) 8-cylinder, 3.92 x 3.58 in (99.6 x 90.9 mm) bore and stroke. Rated 305 hp, 2009–2010.

The Chrysler Mopar Crate and Drag Pak 3.920" bore is oversquare: its 3.92" bore is 9.5% bigger than its 3.58" stroke. The big bore leaves room for big valves, so the 345 leans toward airflow and rpm. The 345's 3.58" stroke reaches 4,000 ft/min of piston speed around 6,700 rpm, which is about where a production bottom end tops out. The 345's rod ratio of 1.732 is in the normal range for a production engine. Each of the 345's 8 cylinders displaces 43.1 ci (707 cc).

Of the 6 engines in the Mopar Crate and Drag Pak family, the 345 is the smallest at 345 ci. The factory built 2 versions on these dimensions, rated at 305 hp, from 2009 to 2010.

Dimensions

Displacement345 ci / 5.7 L
Bore3.92"
Stroke3.58"
Cylinders8
ConfigurationV8
NHRA blueprint max. compression12.7:1
Rod length6.2"
Rod ratio1.732
Bore/stroke ratio1.095

Construction

Block materialcast iron
Head materialcast iron
ValvetrainOHV
Fuel typegas
Firing order1-8-4-3-6-5-7-2
NHRA rating (race package)305 hp
Years2009–2010

What these numbers mean

Bore/stroke character1.095, oversquare, favors rpm and big valves
Mean piston speed at 6,000 RPM3,580 ft/min (typical performance street range)
Rod ratio1.732 (normal for a production engine)
Displacement per cylinder43.1 ci

Cylinder head

Intake valve diameter2.1"
Exhaust valve diameter1.6"

Run the numbers for this engine

Each calculator below starts with the 345's numbers filled in.

Variants sharing these dimensions (2)

Same bore, stroke and compression across these 2 345 versions; only the model year and the factory rating differ.

YearAdvertised HPCode
2009305 hp—
2010305 hp—

Similar engines

← All Mopar Crate and Drag Pak engines