See other engines in this family
Chrysler 383ci 4.03" bore specs: 383 ci (6.3L) 8-cylinder, 4.03 x 3.75 in (102.4 x 95.3 mm) bore and stroke. Built 1960. Rod ratio and piston speed.
The Chrysler 383ci 4.03" bore is oversquare: its 4.03" bore is 7.5% bigger than its 3.75" stroke. The big bore leaves room for big valves, so the 383 leans toward airflow and rpm. The 383's 3.75" stroke reaches 4,000 ft/min of piston speed around 6,400 rpm, which is about where a production bottom end tops out. The 383's rod ratio of 1.695 is in the normal range for a production engine. Each of the 383's 8 cylinders displaces 47.9 ci (785 cc).
The Chrysler 383ci family has 10 engines, all 383 ci, so what sets the 383 apart is its compression, heads and power rating. The factory built 3 versions on these dimensions, in 1960.
| Displacement | 383 ci / 6.3 L |
|---|---|
| Bore | 4.03" |
| Stroke | 3.75" |
| Cylinders | 8 |
| NHRA blueprint max. compression | 10:1 |
| Rod length | 6.358" |
| Rod ratio | 1.695 |
| Bore/stroke ratio | 1.075 |
| Deck height | 9.98" |
| Piston deck clearance | 0.051" below deck |
| Induction | 1-2 |
|---|---|
| NHRA filed HP | 330 hp |
| Years | 1960 |
| Bore/stroke character | 1.075, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,750 ft/min (typical performance street range) |
| Rod ratio | 1.695 (normal for a production engine) |
| Displacement per cylinder | 47.9 ci |
| Intake valve diameter | 1.95" |
|---|---|
| Exhaust valve diameter | 1.6" |
| Chamber volume | 74.5 cc |
| Rocker ratio | 1.5:1 |
| Lifter type | hydraulic |
These open with the 383's bore, stroke and compression already entered.
All 3 versions of the 383 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 1960 | 305 hp | — |
| 1960 | 325 hp | — |
| 1960 | 330 hp | — |