See other engines in this family
The same engine also has a main page: Chrysler 383ci 4.25" bore.
Chrysler 383ci 4.25" bore specs: 383 ci (6.3L) 8-cylinder, 4.25 x 3.375 in (108 x 85.7 mm) bore and stroke. Built 1969. Used in the Chrysler Newport.
With a 4.25" bore over a 3.375" stroke, the Chrysler 383ci 4.25" bore is oversquare by 25.9%, which favors breathing and revs over crank leverage on the 383. The 383's 3.375" stroke doesn't reach 4,000 ft/min of piston speed until about 7,100 rpm, so the valvetrain and breathing run out before the pistons do. The 383's 1.884 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 383's 8 cylinders displaces 47.9 ci (785 cc).
The Chrysler 383ci family has 10 engines, all 383 ci, so what sets the 383 apart is its compression, heads and power rating.
| Displacement | 383 ci / 6.3 L |
|---|---|
| Bore | 4.25" |
| Stroke | 3.375" |
| Cylinders | 8 |
| NHRA blueprint max. compression | 10.2:1 |
| Rod length | 6.358" |
| Rod ratio | 1.884 |
| Bore/stroke ratio | 1.259 |
| Deck height | 9.98" |
| Piston deck clearance | 0.021" above deck |
| Induction | 1-4 |
|---|---|
| NHRA filed HP | 330 hp |
| Years | 1969 |
| Bore/stroke character | 1.259, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,375 ft/min (easy for a street engine) |
| Rod ratio | 1.884 (long, less side load on the bores) |
| Displacement per cylinder | 47.9 ci |
| Intake valve diameter | 2.08" |
|---|---|
| Exhaust valve diameter | 1.74" |
| Chamber volume | 79.5 cc |
| Rocker ratio | 1.5:1 |
| Lifter type | hydraulic |
These open with the 383's bore, stroke and compression already entered.
1 factory vehicle, 1969. Each year opens that model's engine table.