See other engines in this family
The same engine also has a main page: Chrysler 97ci 3.03" bore.
Chrysler 97ci 3.03" bore specs: 97 ci (1.6L) 4-cylinder, 3.03 x 3.39 in (77 x 86.1 mm) bore and stroke. Built 1971. Rod ratio and piston speed.
With a 3.39" stroke over a 3.03" bore, the Chrysler 97ci 3.03" bore is undersquare by 10.6%, so expect the 97 to pull low rather than rev. The 97's 3.39" stroke doesn't reach 4,000 ft/min of piston speed until about 7,100 rpm, so the valvetrain and breathing run out before the pistons do. The 97's 1.785 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 97's 4 cylinders displaces 24.3 ci (397 cc).
Of the 7 engines in the Chrysler 97ci family, the 97 is the smallest at 97 ci.
| Displacement | 97 ci / 1.6 L |
|---|---|
| Bore | 3.03" |
| Stroke | 3.39" |
| Cylinders | 4 |
| NHRA blueprint max. compression | 9.5:1 |
| Rod length | 6.051" |
| Rod ratio | 1.785 |
| Bore/stroke ratio | 0.894 |
| Piston deck clearance | 0.010" below deck |
| Induction | 1-2 |
|---|---|
| NHRA filed HP | 100 hp |
| Years | 1971 |
| Bore/stroke character | 0.894, undersquare, favors low-end torque |
|---|---|
| Mean piston speed at 6,000 RPM | 3,390 ft/min (easy for a street engine) |
| Rod ratio | 1.785 (long, less side load on the bores) |
| Displacement per cylinder | 24.3 ci |
| Intake valve diameter | 1.5" |
|---|---|
| Exhaust valve diameter | 1.224" |
| Chamber volume | 35 cc |
| Rocker ratio | 1.55:1 |
| Lifter type | mechanical |
These open with the 97's bore, stroke and compression already entered.