Chrysler 97ci 3.03" bore Specs: 3.03 x 3.39 in

See other engines in this family

Chrysler 97ci 3.03" bore specs: 97 ci (1.6L) 4-cylinder, 3.03 x 3.39 in (77 x 86.1 mm) bore and stroke. Built 1972–1974. Rod ratio and piston speed.

With a 3.39" stroke over a 3.03" bore, the Chrysler 97ci 3.03" bore is undersquare by 10.6%, so expect the 97 to pull low rather than rev. The 97's 3.39" stroke doesn't reach 4,000 ft/min of piston speed until about 7,100 rpm, so the valvetrain and breathing run out before the pistons do. The 97's 1.785 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 97's 4 cylinders displaces 24.3 ci (397 cc).

Of the 7 engines in the Chrysler 97ci family, the 97 is the smallest at 97 ci. The factory built 6 versions on these dimensions, from 1972 to 1974.

Dimensions

Displacement97 ci / 1.6 L
Bore3.03"
Stroke3.39"
Cylinders4
NHRA blueprint max. compression9.03:1
Rod length6.051"
Rod ratio1.785
Bore/stroke ratio0.894
Piston deck clearance0.000" (zero deck)

Construction

Induction1-2
NHRA filed HP85 hp
Years1972–1974

What these numbers mean

Bore/stroke character0.894, undersquare, favors low-end torque
Mean piston speed at 6,000 RPM3,390 ft/min (easy for a street engine)
Rod ratio1.785 (long, less side load on the bores)
Displacement per cylinder24.3 ci

Cylinder head

Intake valve diameter1.5"
Exhaust valve diameter1.224"
Chamber volume35.7 cc
Rocker ratio1.55:1
Lifter typemechanical

Run the numbers for this engine

These open with the 97's bore, stroke and compression already entered.

Variants sharing these dimensions (6)

All 6 versions of the 97 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
197280 hp—
197285 hp—
197380 hp—
197385 hp—
197481 hp—
197483 hp—

Similar engines

← All Chrysler 97ci engines