See other engines in this family
Ford 200 Six specs: 200 ci (3.3L) 6-cylinder, 3.684 x 3.126 in (93.6 x 79.4 mm) bore and stroke. Built 1973–1974. Used in the Ford Bronco. OHV.
The Ford 200 Six is oversquare — the 3.684" bore exceeds the 3.126" stroke by 17.9% — a layout that favors airflow and RPM over leverage at the crank. The 3.126" stroke does not reach 4,000 ft/min of mean piston speed until about 7,700 RPM, so piston speed is not what limits this engine's revs — valvetrain and breathing are. A rod ratio of 1.508 is short — higher piston acceleration and more side-load, typical of stroker combinations and a reason to watch piston speed closely. Each of the 6 cylinders displaces 33.3 ci (546 cc).
It is one of 9 engines in the Ford 200ci family, all of them 200 ci — the differences between them are in compression, heads and rating, not displacement. 2 factory variants share these dimensions across 1973–1974.
| Displacement | 200 ci / 3.3 L |
|---|---|
| Bore | 3.684" |
| Stroke | 3.126" |
| Cylinders | 6 |
| Configuration | I6 |
| Rod length | 4.715" |
| Rod ratio | 1.508 |
| Bore/stroke ratio | 1.179 |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Years | 1973–1974 |
| Bore/stroke character | 1.179 — oversquare — bore exceeds stroke, which favours higher RPM and larger valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,126 ft/min — conservative for a street engine |
| Rod ratio | 1.508 — short — more side loading and piston dwell at TDC, typical of stroker combinations |
| Displacement per cylinder | 33.3 ci |
Each link opens the calculator with this engine's specs already filled in.
These records share identical bore, stroke, displacement and compression. They differ by model year and factory power rating.
| Year | Advertised HP | Code |
|---|---|---|
| 1973 | — | 200 Six |
| 1974 | — | 200 Six |